Table of Contents
Advertisement
Bowers & Wilkins TECHNICAL SUPPORT
12. Tweeter Unit Removal
With the Mid - Range Unit Speaker removed (as in section 13) the Tweeter Housing
connections can be accessed and disconnected and then removed as shown in Figure: 18.
Figure: 18
HF Molex Socket & Plug
Cut the HF Cable Restraint Tie and disconnect the Molex Plug as shown in Figure: 19.
Figure: 19
The next stage of this process is to use a Molex Removal Tool to extract the Black
and Red cable from the Molex Plug as shown in Figure: 20.
The contents of this document and associated files contain confidential information that is propriety to Bowers & Wilkins, and
are intended solely for the purpose of servicing the product. The information is intended for use by service technicians familiar
with electronic products. No part of the contents should be supplied or published elsewhere.
Page 22 of 51
Molex Plug
HF Retaining Nut/Bolt
HF Cable Restraint Tie
Molex Socket
© Bowers & Wilkins 2016
Hide quick links:
Advertisement
Table of Contents
