Table of Contents
Advertisement
Bowers & Wilkins TECHNICAL SUPPORT
Figure: 37
Outer Aluminium
Rim securing
magnets
With the Outer Aluminium Rim removed now unscrew and remove the 8 x Hex Bolts
as shown in Figure: 38.
Figure: 38
8 x Hex Bolts
Take care as the Bass Unit Speaker may fall forward or may need pulling forward to
release it from the 6" Cabinet Tube.
Figure: 39
The contents of this document and associated files contain confidential information that is propriety to Bowers & Wilkins, and
are intended solely for the purpose of servicing the product. The information is intended for use by service technicians familiar
with electronic products. No part of the contents should be supplied or published elsewhere.
Page 32 of 51
Bass Unit Speaker
Handle the Bass Unit Speaker as
2 x Crimps
shown in Figure: 39.
Now remove the 2 x Crimp Connectors.
This will completely release the Bass
Unit Speaker from the Cabinet.
Note: Follow the same process for
both Bass Unit Speakers.
Refit the new Bass Unit Speaker in
reverse order.
Outer Aluminium
Rim securing
magnets
6" Cabinet Tube
© Bowers & Wilkins 2016
Hide quick links:
Advertisement
Table of Contents
