Tool And Test Equipment - Bowers & Wilkins 804 D3 Technical Manual

Bowers & Wilkins TECHNICAL SUPPORT
1. Tools and Test Equipment
The tools listed below in Figure: 1 are required to carry out the initial testing and repair of the
804 D3 Speakers, , the specialized tools are included in the 800 Diamond Tool Kit.
Figure: 1
1 x HF Retaining Bolt Tool
Removal Tool HH15156, 1 x Terminal Nut Runner HH33782, 1 x Hex/Aln Key 3mm,
1 x Phillips Screwdriver, 1 x Facom Screwdriver 4.0x0.8, 1 x Offset Screwdriver
WIHA 224/1-2, 1 x Tyco tool, 1 x Molex Tool, 1 X Mid Extractor Tool HH15121, MF
Adaptor Cap HH15180, 1 x Tommy Bar HH36994, 1 x 6mm Box Spanner, 1 x Torx
T8, 1 x Amplifier, Spring Hook HH15164, 1 x CD Player, 1 x Stethoscope, 1 x Signal
Generator and Gloves.
Required Tools
Tyco Tool
Hex/Alen Keys
HH37842
Facom 4.0x0.8
HH37214
6mm Box
The contents of this document and associated files contain confidential information that is propriety to Bowers & Wilkins, and
are intended solely for the purpose of servicing the product. The information is intended for use by service technicians familiar
with electronic products. No part of the contents should be supplied or published elsewhere.
Page 6 of 51
1 x Grill Removal Tool HH37214, 1 x HF Motor
HH37842,
Phillips Screwdriver
HH33782
WIHA 224/1-2
HH15164
HH15156
HH36994
HH15121
© Bowers & Wilkins 2016
Molex Tool
HH15180
Torx
Tool - 8