Table of Contents
Advertisement
Bowers & Wilkins TECHNICAL SUPPORT
17. Upper 6" Cabinet Tube Removal
Start by removing the 8 x Hex Bolts shown in Figure: 40 and put these to one side for
reassembly.
Figure: 40
MF Cabinet Tube
Once all 8 x Hex Bolts have been removed the Cabinet Tube will fall forward as shown in
Figure: 41, take care not to damage the Gasket.
Figure: 41
Cabinet Tube
The contents of this document and associated files contain confidential information that is propriety to Bowers & Wilkins, and
are intended solely for the purpose of servicing the product. The information is intended for use by service technicians familiar
with electronic products. No part of the contents should be supplied or published elsewhere.
Page 33 of 51
8 x Hex Bolts
Note: Take care not to
drop any of the 8 x Hex
Bolts into the Cabinet or
scratch the Cabinet
Tube.
Note: Take care not to
Gasket
damage the Cabinet
when lifting the Cabinet
Tube away from the
Cabinet.
Also the Gasket may
stick to the Cabinet
Tube. Ensure that the
Gasket is in place as
shown in Figure: 42,
before refitting the
Cabinet Tube.
© Bowers & Wilkins 2016
Hide quick links:
Advertisement
Table of Contents
