Bowers & Wilkins 804 D3 Technical Manual page 19

Bowers & Wilkins TECHNICAL SUPPORT
Now insert the HF Motor removal tool HH15156 in to the rear of the tweeter, shown in
Figure: 13 and then slowly rotate the tool until it locks in to the HF motor.
Figure: 13
HF Motor Removal
Tool – HH15156
With the HF Motor Removal Tool in the correct position rotate in an anti-clockwise motion
while supporting the HF Motor. This will release the HF Motor so it can be removed from the
front of the HF Housing, see Figures: 14 & 15.
Figure: 14
HF Housing
It should now be possible to remove the tweeter motor from the HF housing, shown in
Figure: 16.
The contents of this document and associated files contain confidential information that is propriety to Bowers & Wilkins, and
are intended solely for the purpose of servicing the product. The information is intended for use by service technicians familiar
with electronic products. No part of the contents should be supplied or published elsewhere.
Page 19 of 51
Figure: 15
HF Motor
Assembly
secured
HF Housing
HF Motor Assy
HF Housing
HF Motor
Assembly
loose
© Bowers & Wilkins 2016