Table of Contents
Advertisement
Bowers & Wilkins TECHNICAL SUPPORT
Once all 8 x Hex Bolts have been removed the Cabinet Tube will fall forward as shown in
Figure: 44, take care not to damage the Gasket.
Figure: 44
Cabinet Tube
Figure: 45
Once the 6" Cabinet Tube has been replaced (in reverse order) and following the instruction
in section 15 refit the Bass Unit Speaker in reverse order.
The contents of this document and associated files contain confidential information that is propriety to Bowers & Wilkins, and
are intended solely for the purpose of servicing the product. The information is intended for use by service technicians familiar
with electronic products. No part of the contents should be supplied or published elsewhere.
Page 35 of 51
Acoustic Foam
Gasket
Note: Take care not to
Gasket
damage the Cabinet
when lifting the Cabinet
Tube away from the
Cabinet.
Also the Gasket may
stick to the Cabinet
Tube. Ensure that the
Gasket is in place as
shown in Figure: 45,
before refitting the
Cabinet Tube.
Note: Aline the Gasket
before refitting the
Cabinet Tube.
Make sure that the
Acoustic Foam is still in
place, if not push it back
in place.
© Bowers & Wilkins 2016
Hide quick links:
Advertisement
Table of Contents
