Table of Contents
Advertisement
Bowers & Wilkins TECHNICAL SUPPORT
Figure: 48
Unscrew Terminal Cap
Using the Terminal Nut Runner Tool HH33782 unscrew the Retaining Nuts on each of
the Terminals as shown in Figure: 49.
Figure: 49
When the Terminal Nuts have been removed carefully slide each terminal out the back of the
Terminal Tray making sure you retain the 2 x Red and 2 x Black Terminal Isolators as shown
in Figure: 47. Once all of the Terminal Nuts have been removed the 4 x Terminal Posts can
be removed from the Terminal Tray. Now the Terminal Posts and Cables are free from the
Terminal Tray proceed to replace with a new Terminal Tray in reverse order.
The contents of this document and associated files contain confidential information that is propriety to Bowers & Wilkins, and
are intended solely for the purpose of servicing the product. The information is intended for use by service technicians familiar
with electronic products. No part of the contents should be supplied or published elsewhere.
Page 37 of 51
Exposed Terminal Fixing
Terminal Nut Runner Tool
© Bowers & Wilkins 2016
Hide quick links:
Advertisement
Table of Contents
