Cleaning - Bowers & Wilkins 704 S2 Series Service – Technical Manual

11. Cleaning

The cabinet surfaces will usually only require dusting however if you wish to use an aerosol or other
cleaning product, apply the cleaner onto a clean soft cloth (not directly onto the product) and test a
small area first as some cleaning products could damage the surface of the cabinet.
Avoid products that are abrasive, contain acid, alkali or antibacterial agents. Marks on the paint sur-
face may be removed with a dilute perfume-free soap solution.
Remove any remaining streak marks by spraying with a proprietary glass cleaner and
lightly wiping dry with a microfibre cloth. Do not use cleaning agents on the drive units and avoid
touching them as this may result in damage.
The contents of this document and associated files contain confidential information that is propriety to B&W
Group Ltd., and are intended solely for the purpose of servicing the product. The information is intended for use
by service technicians familiar with electronic products. No part of the contents should be supplied or published
elsewhere.
Page 30 © B&W Group Ltd 2017