Table of Contents
Advertisement
Bowers & Wilkins TECHNICAL SUPPORT
13. Mid - Range Removal
To gain access to the Mid - Range Speaker start by putting your fingers against the
Dust Cap, then slowly pull it forwards as shown in Figure: 25. Place the Dust Cap in a
safe place for reinsertion on reassembly.
Figure: 25
Mid-Range
Outer Aluminium Rim
Note: Do not attempt to remove the Outer Aluminium Rim, this is fixed to the Mid -
Range Speaker Rim.
With the Dust Cap completely removed as shown in Figure: 26, it is possible to insert
the Mid Extractor Tool HH15121. Turn the Mid Extractor tool anti-clockwise and
remove the Nut, the Washer will fall away as the Nut is removed.
The contents of this document and associated files contain confidential information that is propriety to Bowers & Wilkins, and
are intended solely for the purpose of servicing the product. The information is intended for use by service technicians familiar
with electronic products. No part of the contents should be supplied or published elsewhere.
Page 25 of 51
Rubber Surround Inner
Dust Cap
© Bowers & Wilkins 2016
Hide quick links:
Advertisement
Table of Contents
