Table of Contents
Advertisement
Bowers & Wilkins TECHNICAL SUPPORT
10. Tweeter & Motor Disassembly
To remove the HF Grille it will need pulling forward from the Tweeter housing as
shown in Figure: 8.
Figure: 8
HF Grille
Once the gap appears around the HF Grille insert the HF Grille Removal Tool HH37214 into
the grille release slot as shown in Figure: 9. Make sure the tool is in the correct orientation
and then rotate the Grille in a clockwise motion to release the HF Grille.
Figure: 9
HF Grille
The contents of this document and associated files contain confidential information that is propriety to Bowers & Wilkins, and
are intended solely for the purpose of servicing the product. The information is intended for use by service technicians familiar
with electronic products. No part of the contents should be supplied or published elsewhere.
Page 17 of 51
HF Housing
HF Grille Removal Tool HH 37214
HF Grille Release Slot
Gap
© Bowers & Wilkins 2016
Hide quick links:
Advertisement
Table of Contents
