Table of Contents
Advertisement
Bowers & Wilkins TECHNICAL SUPPORT
19. Terminal Tray Assembly Removal
Start by removing the 2 x Torx Screws using a Torx size 8 key to unscrew the 2 x Torx
screws as shown in Figure: 46.
Figure: 46
With the 2 x Torx Screws removed the Terminal Tray can be pulled forward which is shown
in Figure: 47, this allows access to the Terminal Tray and the crimped wires/ terminals.
Figure: 47
After carefully sliding the Terminal Tray out of the Cabinet unscrew the 4 x Terminal Caps to
expose the Terminal Fixings as shown in Figure: 48.
The contents of this document and associated files contain confidential information that is propriety to Bowers & Wilkins, and
are intended solely for the purpose of servicing the product. The information is intended for use by service technicians familiar
with electronic products. No part of the contents should be supplied or published elsewhere.
Page 36 of 51
Terminal Tray
2 x Torx Screws
Terminal Isolators
Terminal Tray
© Bowers & Wilkins 2016
Hide quick links:
Advertisement
Table of Contents
