Table of Contents
Advertisement
Quick Links
865Pro-FGR
Item Checkup ........................................................ 9
Chapter 1 Specification ........................................... 10
1-1 Mainboard Layout ................................................................. 11
1-2 Mainboard Specification Table ........................................... 12
1-3 Chipset System Block Diagram ........................................... 13
1-4 Mainboard Specifications .................................................... 14
1-4.1 CPU Socket ................................................................................... 14
1-4.2 System Chipsets ........................................................................... 14
1-4.3 Memory ......................................................................................... 14
1-4.4 AMI BIOS ..................................................................................... 14
1-4.5 Accelerated Graphics Port (AGP) Interface ........................... 15
1-4.6 Multi-I/O Functions .................................................................... 15
1-4.7 Expansion Slots ............................................................................ 15
1-4.8 Gigabit Ethernet Controller on board ..................................... 15
1-4.9 Advanced System Power Management .................................... 16
1-4.10 Hardware Monitor on board ................................................... 16
1-4.11 AC'97 Audio Codec on board ................................................. 16
1-4.12 Serial ATA RAID Controller ................................................... 16
1-4.13 IDE RAID Controller ............................................................... 16
1-4.14 IEEE 1394 Interface .................................................................. 17
1-4.15 Form Factor ................................................................................ 17
Chapter 2 Hardware Setup ..................................... 18
2-1 CPU Installation with Socket 478B .................................... 19
2-1.1 To Identify a Pentium 4 CPU ..................................................... 19
2-1.2 CPU Installation with Socket 478B .......................................... 20
Contents
4
Advertisement
Table of Contents
Related Manuals for SOLTEK 865Pro-FGR
Summary of Contents for SOLTEK 865Pro-FGR
-
Page 1: Table Of Contents
865Pro-FGR Contents Item Checkup ............9 Chapter 1 Specification ........... 10 1-1 Mainboard Layout ..............11 1-2 Mainboard Specification Table ........... 12 1-3 Chipset System Block Diagram ........... 13 1-4 Mainboard Specifications ............ 14 1-4.1 CPU Socket ................... 14 1-4.2 System Chipsets ................14 1-4.3 Memory .................. - Page 2 Contents 2-2 Pentium 4 CPU Fan Installation ......... 21 2-3 Memory Installation ............. 22 2-3.1 To Install DDR SDRAM Module ..........22 2-3.2 Dual Channel Memory Features ..........23 2-3.3 To Remove a DIMM ..............23 2-4 AGP 8X/4X Slot Installation ..........24 2-5 IDE Connectors Installation ..........
- Page 3 865Pro-FGR 3-3.1 Install AC’97 6-channel Audio Driver ........45 3-3.2 Verify 6-channel Audio ............... 46 3-4 To Install Hardware Monitor Utility ........49 3-4.1 Installation ................... 49 3-4.2 Verification .................. 50 3-5 To Install LAN Drivers ............51 3-5.1 Intel 82547EI LAN driver on Windows ME / 2000 / XP ..51 3-5.2 Intel 82547EI LAN driver on Windows 9X ......
- Page 4 Contents 4-6.4 Advanced Chipset Features ............83 4-6.4.1 NorthBridge Configuration ............. 84 4-6.4.2 SouthBridge Configuration ............. 86 4-6.5 PCI/PNP Resource Management ..........87 4-6.6 Boot Configuration Setup ............89 4-6.6.1 Boot Settings Configuration ............ 90 4-6.6.2 Boot Device Priority ..............91 4-6.7 Boot Security Features ...............
- Page 5 865Pro-FGR 5-7-2 Sil3114 SATA RAID Driver on Windows 98SE/Me ..... 108 5-8 To Set up IT8212F with ITE RAID Interface ....110 5-8-1 ITE RAID Setup ................ 111 5-8-2 To Install ITE RAID Driver ............ 113 APPENDICES ............114 Appendix-1 Identify Mainboard Model Number ....115 Appendix-2 Technical Terms .............
-
Page 6: Item Checkup
Contents Item Checkup • Mainboard • Multi-lingual Quick Installation Guide • User Manual (Mainboard) • Support CD • Bundled Bonus Pack CD • Bundled Bonus Pack Manual • 2 x Floppy Diskette with RAID Driver • Cable : 2 x ATA66/100 IDE Cable 4 x Serial ATA Cable 2 x SATA Power Cable 1 x FDD Cable... -
Page 7: Chapter 1 Specification
865Pro-FGR Chapter 1 Specification Introduction This mainboard features an integration of the powerful processor In- tel Pentium 4 and the single-chip North Bridge Intel 865PE. The Intel P4 processor is a rapid execution engine providing 800/533/400MHz system bus, while North Bridge Intel 865PE is a high performance inte- grated chipset providing Dual Channel DDR 400/333/266 SDRAM memory interface, Hub interface as well as AGP interface. -
Page 8: Mainboard Layout
Chapter 1 Specification 1-1 Mainboard Layout PS/2 Keyboard (underside) PS/2 Mouse DIMM1 DIMM2 DIMM3 DIMM4 (on top) Battery JKB1 mPGA478 USB1 ATX Power +12V Power Intel RJ45 (on top) Intel Intel 82865PE 82547EI USB2 865PE AGP1 (8X/4X) AC'97 ALC650 JBAT1 PCI1 CD_IN1 Intel... -
Page 9: Mainboard Specification Table
865Pro-FGR 1-2 Mainboard Specification Table 865Pro-FGR Specifications and Features Socket 478B for P4 CPU(HT CPU included) Intel 865PE, 800/533/400MHz FSB North Bridge Intel ICH5 South Bridge BIOS AMI BIOS Dual-channel DDR 400/333/266 SDRAM, up to Memory 4GB in 4 DIMM slots... -
Page 10: Chipset System Block Diagram
Chapter 1 Specification 1-3 Chipset System Block Diagram Intel Pentium 4 CPU (Hyper-Threading Included) System Bus 800/533/400MHz RJ45 (Communication Streaming DDR memory Architecture) North Bridge Interface System 82547EI Memory DDR 400/ Intel 333/266 865PE SDRAM AGP 8X/4X AGP Slot 266MB/s Hub Interface 5 PCI Slots ATA 100/66/33... -
Page 11: Mainboard Specifications
865Pro-FGR 1-4 Mainboard Specifications 1-4.1 CPU Socket ® CPU Socket 478B on board, supporting Intel Pentium 4 processors (including Intel Hyper-Threading CPUs) in 478-pin package for : -- 800/533/400MHz System Bus -- 512KB L2 Advanced Transfer Cache -- Hyper-pipelined technology -- Advanced dynamic execution;... -
Page 12: 1-4.5 Accelerated Graphics Port (Agp) Interface
Chapter 1 Specification 1-4.5 Accelerated Graphics Port (AGP) Interface AGP Controller embedded on board, supporting: • 1.5V(8X/4X) power mode only, 1 AGP Slot supported • 8X 66MHz AD and SBA signaling; AGP pipelined split-transaction long burst transfers up to 2GB/sec. •... -
Page 13: 1-4.9 Advanced System Power Management
• Hardware Monitor supported by W83627HF, providing monitoring and alarm for flexible desktop management of hardware voltage, tempera- tures and fan speeds. • Utility Software Soltek Hardware Monitor for displaying system status is enclosed in Support CD for user’s installation. 1-4.11 AC’97 Audio Codec on board AC’97 Audio Codec 2.2 compliant on board... -
Page 14: 1-4.14 Ieee 1394 Interface
Chapter 1 Specification 1-4.14 IEEE 1394 Interface The IEEE 1394 Controller, VIA VT6307 chipset on board, providing en- hanced PC connectivity for a wide range of devices, including consumer audio/video components, storage periperals, and other portable devices. • PCI-bus based open host controller, compliant with IEEE 1394A-2000 standard for high performance serial bus •... -
Page 15: Chapter 2 Hardware Setup
865Pro-FGR Chapter 2 Hardware Setup To Get Things Ready for Hardware Setup ! 1. We recommend to install your CPU before any other components. For detailed installation instructions of processor, you can also refer to the pamphlet enclosed in your CPU package. -
Page 16: Cpu Installation With Socket 478B
Chapter 2 Hardware Setup 2-1 CPU Installation with Socket 478B 2-1.1 To Identify a Pentium 4 CPU Intel PENTIUM 4 2.80 GHz / 512 / 800 (Hyper-Threading CPU included) 3) System Bus 2) CPU L2 Cache 1) CPU Working Frequency On the heatsink side of a Pentium 4 CPU, there printed a line of figures to identify its specifications. -
Page 17: 2-1.2 Cpu Installation With Socket 478B
865Pro-FGR 2-1.2 CPU Installation with Socket 478B This mainboard is built with CPU Socket 478B ( 478-pin) supporting the Intel Pentium 4 CPU: • Follow the steps described in this section to install the 478-pin Pen- tium 4 CPU into the on board Socket 478. -
Page 18: Pentium 4 Cpu Fan Installation
Chapter 2 Hardware Setup 2-2 Pentium 4 CPU Fan Installation CPU Fan Connector Pentium 4 Fanbase 1.Press down 4 latches. 2.Press down the 2 levers to lock fan to fanbase 3.Connect Fan Connector to CPU FAN connector The above pictures are taken from sample mainboards as installation illustr- ation. -
Page 19: Memory Installation
865Pro-FGR 2-3 Memory Installation How to tackle the memory Modules: • Make sure to unplug your power supply before adding or removing memory module. • Pay attention to the orientation of the DIMM slots. 2-3.1 To Install DDR SDRAM Module •... -
Page 20: 2-3.2 Dual Channel Memory Features
Chapter 2 Hardware Setup 2-3.2 Dual Channel Memory Features • Dual Channel memory configuration provides higher performance than Single Channel configurations • Matched DIMMs need to have identical density, DRAM technology, DRAM bus width, and equal number of memory banks. •... -
Page 21: Agp 8X/4X Slot Installation
865Pro-FGR 2-4 AGP 8X/4X Slot Installation The AGP slot on board supports 1.5V AGP 8X/4X card only. A Rib is specifically added to the 8X/4X slot so as to match the AGP 8X/4X card. To insert a 3.3V AGP 2X card into the AGP 4X slot will damage the system chip and burn the 1.5V circuitry. -
Page 22: Ide Connectors Installation
Chapter 2 Hardware Setup 2-5 IDE Connectors Installation To install IDE Connector, you may connect the blue connector of IDE cable to the primary (IDE1) or secondary (IDE2) connector on board, and then connect the gray connector to your slave device and the black connector to your master device. -
Page 23: Serial Ata Raid Connectors
865Pro-FGR 2-6 Serial ATA RAID Connectors The Serial ATA is designed to improve the Parallel ATA with the capabil- ity of Hot Plug and offer a data bandwidth of 150Mbytes/second. It also reduce voltage and pin count and can be implemented with thin cables which improve the inner ventilaton of PC cases. -
Page 24: Floppy Drive Connector Installation
Chapter 2 Hardware Setup 2-7 Floppy Drive Connector Installation To install FDC, you should connect the end of FDC cable with single connector to the board, and connect the other end with two connectors to the floppy drives. PS/2 Keyboard (underside) PS/2 Mouse DIMM1 DIMM2... -
Page 25: Atx V2.03 Power Supply Installation
865Pro-FGR 2-8 ATX V2.03 Power Supply Installation +12V Power Connector +12V PWR OK PS ON# +3.3V -12V PS/2 Keyboard (underside) PS/2 Mouse DIMM1 DIMM2 DIMM3 DIMM4 (on top) Battery JKB1 +3.3V +3.3V mPGA478 USB1 Pin1 Pin11 Main Power Connector (20-pin) -
Page 26: Jumper Settings
Chapter 2 Hardware Setup 2-9 Jumper Settings The following diagrams show the locations and settings of jumper blocks on the mainboard. JCLK1&JCLK2: CPU Frequency Select JKB1: (default) Keyboard / Mouse Wake Up 100MHz 133MHz 200MHz Auto- (FSB400) (FSB533) (FSB800) Detection 1-2 closed (default) Disabled 2-3 closed... -
Page 27: 2-9.1 Jclk1 & Jclk2: Cpu Frequency Select
865Pro-FGR How to tackle the Jumpers: A 2-pin Jumper A 3-pin Jumper If a pin-header (of 2 or more pins) is designed in such a way that its pins can be closed or linked together to The conductor inside the cap set up a specific function, this header links two header-pins together. -
Page 28: 2-9.2 Jbat1: Clear Cmos
Chapter 2 Hardware Setup Further Notes on CPU Overclocking: 1. If you have successfully booted system, with or without CPU overclock, you still can try another CPU overclock in BIOS Setup. Please enter BIOS Setup, choose “Frequency/Voltage Control” of Advanced BIOS Features, and configure the “CPU Clock” item to raise your CPU clock. -
Page 29: Other Connectors Configuration
865Pro-FGR 2-10 Other Connectors Configuration This section lists out all connectors configurations for users’ reference. 2-10.1 On Board Fan Connectors Void PS/2 Keyboard (underside) PS/2 Mouse DIMM1 DIMM2 DIMM3 DIMM4 (on top) Battery Sensor JKB1 +12V mPGA478 USB1 +12V ATX Power Sensor Conn. -
Page 30: 2-10.2 Usb Ports And Usb Pin-Headers
Chapter 2 Hardware Setup 2-10.2 USB Ports and USB Pin-headers This series provides four USB ports USB0 to USB3 on board support- ing various USB devices. In addition, two USB pin-headers are added on board to provide expansion of four more optional USB ports by us- ing two additional USB cables. -
Page 31: 2-10.3 Chassis Panel Connectors
865Pro-FGR 2-10.3 Chassis Panel Connectors A : PS/2 Mouse H : COM1 Connector B : USB 0 (top) : COM2 Connector C : LPT1 Port : USB 2 (middle) D : RJ45 USB 3 (underside) E : Line in/ K : Microphone Input /... -
Page 32: 2-10.5 Cd-Rom Audio Connectors
Chapter 2 Hardware Setup 2-10.5 CD-ROM Audio Connectors CD-IN1 is an audio connector connecting CD-ROM audio to mainboard. PS/2 Keyboard (underside) PS/2 Mouse DIMM1 DIMM2 DIMM3 DIMM4 (on top) Battery JKB1 mPGA478 USB1 ATX Power CD-ROM Audio Pin Assignment +12V Power Intel RJ45 (on top) -
Page 33: 2-10.7 Front Panel Audio Connector
865Pro-FGR 2-10.7 Front Panel Audio Connector PS/2 Keyboard (underside) PS/2 Mouse DIMM1 DIMM2 DIMM3 DIMM4 (on top) JKB1 Battery mPGA478 USB1 This Mainboard is designed with a Front ATX Power Panel Audio connector “CN3” which provides connection to your chassis. -
Page 34: 2-10.9 Complex Pin-Header
Chapter 2 Hardware Setup 2-10.9 Complex Pin-header This complex Pin-header consists of the following connectors for vari- ous supports. When you have fixed the mainboard to the case, join the connectors of this Complex Pin-header to the case Front Panel. PWRBT# PLED- (1)Power Switch... - Page 35 865Pro-FGR (1) Power Switch Connector: Connection: Connected to a momentary button or switch. Function: Manually switching the system between “On” and “Soft Off”. Pressing the momentary button for more than 4 seconds will also turn the system off. (2) IR Connector (Infrared Connector): Connection: Connected to Connector IR on board.
-
Page 36: 2-10.10 Led2: Debug Led
Chapter 2 Hardware Setup 2-10.10 LED2: Debug LED A Debug LED is built in on board to display various digital messages which stand for the running status of the mainboard. The CheckPoint and Beep Code List is enclosed in Appendices of this manual. Please refer to the tables describing the type of checkpoints for more information. -
Page 37: 2-10.11 Ieee 1394 Connectors
865Pro-FGR 2-10.11 IEEE 1394 Connectors IEEE 1394 controller, VIA VT6307 chipset on board, supports up to 400MB/s transfer rate with Plug and Play expansion interface. IEEE3 Headers are built on board, which require two IEEE 1394 cables (optional) to provide 9-pin serial connectors for devices. Because of the same pin allocation between the IEEE 1394 Header and the USB Header, please do not insert an USB cable to the IEEE 1394 Header. -
Page 38: 2-10.12 S/Pdif Connector
Chapter 2 Hardware Setup 2-10.12 S/PDIF Connector S/PDIF (Sony/Philips Digital Interface) is a newest audio transfer file format, which provides amazing quality through optical fiber and allows you to enjoy digital audio instead of analog audio, which could degrade signal quality. Through an optional audio cable, you can connect the SPDIF connector to other end of the S/PDIF audio module, which bears S/PDIF digial output. -
Page 39: Chapter 3 Software Setup
865Pro-FGR Chapter 3 Software Setup Drivers, Utilities and Software Installation • Support CD: This series of mainboards will be shipped with a Support CD which contains those necessary driver files, Application Softwares and some helpful utilities. It is a user-friendly, auto-run CD which will open itself up in a CD-ROM automatically. -
Page 40: To Open Up The Support Cd
Chapter 3 Software Setup 3-1 To Open up the Support CD 1. Please put the Support CD enclosed in your mainboard package into the CD-ROM drive. In a few seconds, the Main Menu will automatic- ally appear, displaying the contents to be installed for this series: 2. -
Page 41: Intel Chipset Software Installation Utility
865Pro-FGR 3-2 Intel Chipset Software Installation Utility 1. Following the procedures of opening the Support CD, click to “ Install Intel Chipset software installation Utility” to proceed. 2. The Intel Service Pack InstallShield Wizard will pop up to guide you to the Intel Service pack installation. -
Page 42: Ac'97 Audio Driver Installation
Chapter 3 Software Setup 3-3 AC’97 Audio Driver Installation Avance AC97 Audio Codec on board, AC’97 2.2 compatible stereo audio code for PC multimedia systems. Avance AC’97 Audio Codec Driver is pro- vided in Support CD for user’s installation. 3-3.1 Install AC’97 6-channel Audio Driver 1. -
Page 43: 3-3.2 Verify 6-Channel Audio
865Pro-FGR 3-3.2 Verify 6-channel Audio After installation of AC’97 6-channel Codec, you must configure the 5.1 Speaker connection to enable the 6-channel audio. 1. Connect your on-board Audio Connector to your 6-channel speakers as depicted in the figure below: Pale Blue Connector... - Page 44 Chapter 3 Software Setup 3. The AC’97 Audio Configuration” screen will pop out. Clikc the “Speaker Configuration” bar with your mouse. 4. Instantly, the “Speaker Configuration” screen will pop out. Pick the items “6-channel mode for 5.1 speakers output” and “ Synchronize the phonejack switch with the speakers settings”...
- Page 45 865Pro-FGR 5. At finishing the Speakers Configuration, you can also click the “Speaker Test” bar on the screen to test the 6-channel performance. The figure below is the “Speaker Test” screen with testing instructions enclosed on it. Follow the instructions to perform the Speakers Test.
-
Page 46: To Install Hardware Monitor Utility
Chapter 3 Software Setup 3-4 To Install Hardware Monitor Utility 3-4.1 Installation Hardware Monitor is built on this mainboard. Its installation is pro- grammed to a fully automated mode on Windows 9X/Me/NT4/2000/ XP. Users can follow the model installation below for its installation on various Windows System. -
Page 47: 3-4.2 Verification
865Pro-FGR 3-4.2 Verification 1. After installing Soltek Hardware Monitor, double click “SoltekHM” icon on the desktop to open the main window of the Soltek Hardware Doctor. 2.Then the pop-up screen will show all information about CPU Temperature, Fan Speed and various Voltages. -
Page 48: To Install Lan Drivers
Chapter 3 Software Setup 3-5 To Install LAN Drivers 3-5.1 Intel 82547EI LAN driver on Windows ME / 2000 / XP The LAN driver contained in the Support CD is not included in the Autorun Menu. To install Intel 82547EI LAN driver on Windows 2000 / XP, please follow the steps shown below: 1. -
Page 49: 3-5.2 Intel 82547Ei Lan Driver On Windows 9X
865Pro-FGR 3-5.2 Intel 82547EI LAN driver on Windows 9X The LAN driver contained in the Support CD is not included in the Autorun Menu. To install Intel 82547EI LAN driver on Windows 9X, please follow the steps shown below: 1. On the “Start” screen of your system, please click to the following... - Page 50 Chapter 3 Software Setup 6. As illustrated in the picture below, check the item “Specify a location” and click the “Browse” button to find out the correct path for the driver. Supposing your CD-ROM drive is Drive E, please type: E:\Driver\Network\Intel_LAN\GIGABPS\Win9x_me\Win_98me into the blank bar.
-
Page 51: To Install Usb 2.0 Driver For Windows 2000/Xp
865Pro-FGR 3-6 To Install USB 2.0 Driver for Windows 2000/XP USB V2.0 with its 480Mb/s transfer rate supports operating system Windows 2000 and Windows XP via the Windows 2000 and Windows XP Service Pack. For archieving Intel USB 2.0 support, users should install the latest Service Pack for Windows 2000 or Windows XP. -
Page 52: Install Sil3114 Sata Driver On Windows 98Se/Me
Chapter 3 Software Setup 3-7 Install SIL3114 SATA Driver on Windows 98SE/ME For Windows 98SE/ME users of SATA interface supported by Silicon Image Sil3114 SATA RAID Controller, please pay attention to the fol- lowing extraordinary configuration in BIOS Setup: When Windows 98SE/ME system is to be installed on SATA interface, the configuration of “Sil3114 Configuration”... - Page 53 865Pro-FGR (9) Instantly, the “PCI Mass Storage Controller Properties“ screen shows up. Please click the “General” bar to continue. (10) In the “General” screen, click “Reinstall Driver” button to continue. Please note that the status of “Device Usage” should stay at “Exists in all hardware profiles”.
-
Page 54: To Install Raid Driver
Chapter 3 Software Setup 3-8 To Install RAID Driver For SATA RAID Driver Setup and IDE RAID Driver Setup, please refer to Chapter 5 for further detailed installation guide. PS/2 Keyboard (underside) PS/2 Mouse DIMM1 DIMM2 DIMM3 DIMM4 (on top) Battery JKB1 mPGA478... -
Page 55: Chapter 4 Ami Bios Setup
4-5 To Update BIOS 4-6 BIOS Setup Attention: The BIOS Setup is subject to constant update without further notice to users. It is necessary for users to update the onboard BIOS by the latest BIOS version provided in our web site: www.soltek.com.tw... -
Page 56: About Bios Setup
Chapter 4 BIOS Setup 4-1 About BIOS Setup BIOS setup is an interactive BIOS program that you need to run when: 1. Changing the hardware of your system. (For example: installing a new Hard Disk etc.) 2. Modifying the behavior of your computer. (For example: changing the system time or date, or turning special features on or off etc.) 3. -
Page 57: To Update Bios
865Pro-FGR 4-5 To Update BIOS • System BIOS is incorporated into a Flash memory component. Flash BIOS allows user to upgrade BIOS without the need to replace an EPROM component. • The Upgrade Utility can be loaded on a floppy diskette for upgrading saving, and verifying the system BIOS. - Page 58 Chapter 4 BIOS Setup Step 4. Under “ A “ prompt, type “ amiflash *.ROM “ and then press <Enter> to run BIOS update program. (*.ROM depends on your mainboard model and version code. Instead of typing “*”, you should type the specific file name for your specific mainboard).
-
Page 59: Bios Setup
865Pro-FGR 4-6 BIOS SETUP --- CMOS Setup Utility 4-6.1 CMOS Setup Utility This mainboard comes with the AMI BIOS from American Megatrends Inc. Enter the CMOS Setup Utility Main Menu by: 1. Turn on or reboot your system. After a series of diagnostic checks, the following message will appear: PRESS <Del>... - Page 60 <F9>: “Optimized Defaults” alows user to load Optimal Defaults or not. Attention: The BIOS Setup is subject to constant update without further notice to users. It is necessary for users to update the onboard BIOS by the latest BIOS version provided in our web site: www.soltek.com.tw...
-
Page 61: 4-6.2 Standard Bios Features
865Pro-FGR 4-6.2 Standard BIOS Features “Standard BIOS Features” allows users to configure Time and Date. This menu also displays system information. Run the Standard BIOS Features as follows: Choose “Standard BIOS Features” from the Main Menu and press <Enter>. The following screen will appear: CMOS Setup Utility - Copyright (C) 1985-2002, American Megatrends, Inc. -
Page 62: 4-6.3 Advanced Bios Features
Chapter 4 BIOS Setup 4-6.3 Advanced BIOS Features Advanced BIOS Features allows user to configure HDD, Floppy, Serial Port, Parallel Port etc..Run the Advanced BIOS Features as follows: Choose “Advanced BIOS Features” from the Main Menu and a screen with a list of options will appear: CMOS Setup Utility - Copyright (C) 1985-2002, American Megatrends, Inc. -
Page 63: 4-6.3.1 Cpu Configuration
865Pro-FGR 4-6.3.1 CPU Configuration Choose “CPU Configuration” in “Advanced BIOS Features” and press <Enter>. The following sub-screen will appear for configuration: CPU Configuration Help Item Configure advanced CPU settings Sets the ratio between CPU Manufacturer : Intel core clock and the FSB Brand String : Intel(R) Pentium (R) 4 CPU 1500MHz Frequency. -
Page 64: 4-6.3.2 Ide Configuration
Chapter 4 BIOS Setup 4-6.3.2 IDE Configuration Choose “IDE Configuration” in “Advanced BIOS Features” and press <Enter>. The following sub-screen will appear for IDE Devices configuration: IDE Configuration Help Item IDE Configuration IDE Configuration P-ATA only S-ATA Running Enhanced Mode P-ATA Channel Selection Both S-ATA Ports Definition... - Page 65 865Pro-FGR 4-6.3.2-1 IDE Configuration IDE Configuration Allows you to configurare IDE device mode. Choices: P-ATA only: for Parallel IDE only; S-ATA Only: For S-ATA running on board only; P/S-ATA(Win98/Me): P/S-ATA on Win98/Me only Disabled: IDE Configuration disabled IDE Configuration Choosing “P-ATA only” to configure the...
- Page 66 Chapter 4 BIOS Setup 4-6.3.2-2 Primary/Secondary IDE Master/Slave and Third/Fourth IDE Master Primary IDE Master Hard Disk Primary IDE Slave ATAPI CDROM Secondary IDE Master Not Detected Secondary IDE Slave Not Detected Third IDE Master Not Detected Fourth IDE Master Not Detected Primary/Secondary Press <Enter>...
- Page 67 865Pro-FGR Type To select the types of the IDE devices: Not Installed; Auto: Setting type automatically CD-ROM: ATAPI (Packet Interface) CD-ROM drive ARMD: ATAPI Removable Media Device LBA/Large mode To auto-select (default) or disable LBA/Large mode. Block (Multi-Sector To auto-select (default) or disable Block Mode. If...
-
Page 68: 4-6.3.3 Floppy Configuration
Chapter 4 BIOS Setup 4-6.3.3 Floppy Configuration Choose “Floppy Configuration” in “Advanced BIOS Features” and press <Enter>. The following sub-screen will appear for configuration: Floppy Configuration Help Item Floppy Configuration Floppy A 1.44 MB 3.5 in Select the type of floppy Floppy B Disabled drive connected to the... -
Page 69: 4-6.3.4 Super Io Configuration
865Pro-FGR 4-6.3.4 Super IO Configuration Choose “SuperIO Configuration” in “Advanced BIOS Features” and press <Enter>. The following sub-screen will appear for configuration: SuperIO Configuration Help Item Configure Win627 Super IO Chipset OnBoard Floppy Controller Enabled Allows BIOS to Enable or... - Page 70 Chapter 4 BIOS Setup OnBoard CIR Port Allows you to set the onboard CIR Port. Choices: Disabled; 2E0; 3E0 CIR Port IRQ Allows you to set the onboard CIR Port IRQ for 2E0 or 3E0. Choices: IRQ3; IRQ4; IRQ10; IRQ11 Parallel Port Address Allows you to configure Parallel Port Address.
-
Page 71: 4-6.3.5 Hardware Health Configuration
865Pro-FGR 4-6.3.5 Hardware Health Configuration Choose “Hardware Health Configuration” in “Advanced BIOS Features” and press <Enter>. The following sub-screen will appear for configuration: Hardware Health Configuration Hardware Health Configuration Help Item System Temperature : 34˚C/93˚F Enables Hardware Health Monitoring Device. -
Page 72: 4-6.3.6 Acpi Configuration
Chapter 4 BIOS Setup 4-6.3.6 ACPI Configuration Choose “ACPI Configuration” in “Advanced BIOS Features” and press <Enter>. The following sub-screen will appear for ACPI configuration: ACPI Configuration Help Item ACPI Settings Enables Hardware ACPI General ACPI Configuration Press Enter support for Operating System. - Page 73 865Pro-FGR Advanced ACPI Configuration: To press< Enter > on Advanced ACPI Configuration will reveal the following item(s). ACPI 2.0 Support Allows you to enable / disable ACPI (Advanced Con- figuration and Power Interface) 2.0 Support function. Choices: Yes; No ACPI APIC Support Allows you to enable / disable ACPI APIC (Advanced Programmable Interrupt Controller) Support function.
-
Page 74: 4-6.3.7 Usb Configuration
Chapter 4 BIOS Setup 4-6.3.7 USB Configuration Choose “USB Configuration” in “Advanced BIOS Features” and press <Enter>. The following sub-screen will appear for configuration: USB Configuration Help Item USB Configuration Enable USB host Module Version - 2.23.2-7.4 controllers. USB Devices Enabled : None USB Function 8 USB Ports... - Page 75 865Pro-FGR If users have installed USB Devices on the system, these items will appear as below for further configuration. USB Mass Storage Press “Enter” to view its submenu shown below. Device Config USB Mass Storage To select number of seconds POST waits for the Reset Delay USB mass storage device after start unit command.
-
Page 76: 4-6.3.8 Frequency/Voltage Control
Chapter 4 BIOS Setup 4-6.3.8 Frequency/Voltage Control Choose “Frequency/Voltage Control” in “Advanced BIOS Features” and press <Enter>. The following sub-screen will appear for configuration: Frequency/Voltage Control Help Item Frequency/Voltage Configuration Press “+”/”-” to select. CPU Linear Frequency Enabled CPU Clock 100MHz AGP Voltage Control 1.5V... -
Page 77: 4-6.3.9 Power Management
865Pro-FGR 4-6.3.9 Power Management Choose “Power Management” in “Advanced BIOS Features” and press <Enter>. The following sub-screen will appear for configuration: Power Management Help Item APM Configuration Enable or disable APM. Power Management/APM Enabled Video Power Down Mode Suspend Hard Disk Power Down Mode... - Page 78 Chapter 4 BIOS Setup Power Button Function Allows you to set power Button function. Choices: On/Off (default); Suspend Restore on AC/Power Allows you to set the restore state from AC/Power Loss Loss. Choices: Last State; Power Off (default); Power On Resume on Ring Allows you to enable / disable (default)the Resume on Ring Signal function.
-
Page 79: 4-6.3.10 Sil3114 Configuration
865Pro-FGR 4-6.3.10 Sil3114 Configuration Choose “Sil3114 Configuration” in “Advanced BIOS Features” and press <Enter>. The following sub-screen will appear for configuration: Sil3114 Configuration Help Item Sil3114 Configuration IDE or RAID Mode IDE Mode : Move Enter : Select +/- : Values... -
Page 80: 4-6.4 Advanced Chipset Features
Chapter 4 BIOS Setup 4-6.4 Advanced Chipset Features Advanced Chipset Features is used to modify the values of chipset buffers. These buffers control the system options. Run the Advanced Chipset Features as follows: Choose “Advanced Chipset Features” from the Main Menu and a list of option will appear: CMOS Setup Utility - Copyright (C) 1985-2002, American Megatrends, Inc. -
Page 81: 4-6.4.1 Northbridge Configuration
865Pro-FGR 4-6.4.1 NorthBridge Configuration Choose “NorthBridge Configuration” in “Advanced Chipset Features” and press <Enter>. The following sub-screen will appear for configuration: NorthBridge Configuration Help Item DRAM Frequency Auto Configure DRAM Timing by SPD Enabled Memory Hole Disabled Init. Graphic Adapter Priority... - Page 82 Chapter 4 BIOS Setup DRAM CAS# Latency With SDRAM Timing by SPD disabled, you can se- lect the SDRAM CAS# (Column Address Strode)la- tency manually. Choices: 2 Clocks; 2.5 Clocks; 3 Clocks DRAM RAS# With SDRAM Timing by SPD disabled, you can se- Precharge lect the SDRAM RAS# (Row Address Strode) Precharge cycle manually.
-
Page 83: 4-6.4.2 Southbridge Configuration
865Pro-FGR 4-6.4.2 SouthBridge Configuration Choose “SouthBridge Configuration” in “Advanced Chipset Features” and press <Enter>. The following sub-screen will appear for configuration: SouthBridge Configuration Help Item OnBoard AC’97 Audio Auto : Move Enter : Select +/- : Values F10: Save Esc: Exit... -
Page 84: 4-6.5 Pci/Pnp Resource Management
Chapter 4 BIOS Setup 4-6.5 PCI/PNP Resource Management PCI/PNP Resource Management allows you to modify the system’s power saving functions. Choose “PCI/PNP Resource Management” from the Main Menu and a screen with a list of options will appear: CMOS Setup Utility - Copyright (C) 1985-2002, American Megatrends, Inc. PCI/PNP Resource Management Help Item Advanced PCI/PNP Settings... - Page 85 865Pro-FGR Allocate IRQ to PCI Allows you to assign IRQ to PCI VGA card if card requests IRQ. Choices: Yes(default); No Palette Snooping This option allows the BIOS to preview VGA status, and to modify the information delivered from the feature Connector of the VGA card to MPEG card.
-
Page 86: 4-6.6 Boot Configuration Setup
Chapter 4 BIOS Setup 4-6.6 Boot Configuration Setup Boot Configuration Setup allows you to modify the system’s boot settings. Choose “Boot Configuration Setup” from the Main Menu and a screen with a list of options will appear: CMOS Setup Utility - Copyright (C) 1985-2002, American Megatrends, Inc. Boot Configuration Setup Help Item Boot Settings... -
Page 87: 4-6.6.1 Boot Settings Configuration
865Pro-FGR 4-6.6.1 Boot Settings Configuration Choose “Boot Settings Configuration” in “Boot Configuration Setup” and press <Enter>. The following items will appear for onfiguration: Boot Configuration Setup Help Item Boot Settings Configure Settings Quick Boot Enabled during System Boot. Quiet Boot... -
Page 88: 4-6.6.2 Boot Device Priority
Chapter 4 BIOS Setup PS/2 Mouse Support Enabled (default), PS/2 mouse is supported. Disabled, PS/2 Mouse is not supported. If “Auto” is set, the system will auto detect the PS/2 Mouse. Wait For ‘F1’ If Error Allows you to hit F1 key when errors occur. Choices: Enabled(default);... -
Page 89: 4-6.7 Boot Security Features
865Pro-FGR 4-6.7 Boot Security Features Boot Security Features allows you to modify the system’s boot security settings. Choose “Boot Security Features” from the Main Menu and a screen with a list of options will appear: CMOS Setup Utility - Copyright (C) 1985-2002, American Megatrends, Inc. -
Page 90: 4-6.7.3 Change Supervisor Password
Chapter 4 BIOS Setup 4-6.7.3 Change Supervisor Password This option allows you to set a new Supervisor password for the system: 1. Choose “Change Supervisor Password” in the “BIOS Security Fea- tures” and press <Enter>. Then the following message appears: [ Enter new supervisor password ] 2. -
Page 91: 4-6.7.4 Change User Password
865Pro-FGR 4-6.7.4 Change User Password This option allows you to set a new User password for the system: 1. Choose “Change User Password” in the “BIOS Security Features” and press <Enter>. Then the following message appears: [ Enter New Password ] 2. -
Page 92: 4-6.7.6 Boot Sector Virus Protection
Chapter 4 BIOS Setup Password Check Allows you to set BIOS to check up password with a password prompt at BIOS Setup or whenever re- starting system. This option will appear when you have set Supervisor Password or User Password. Choices: Setup (default);... -
Page 93: 4-6.9 Discard Changes ( And Exit )
865Pro-FGR 4-6.9 Discard Changes ( and Exit ) Discard Changes option allows you to exit (or not exit) the Setup Utility without saving the modifications that you have specified. Highlight this option on the Main Menu and press <Enter> and the following message... - Page 94 Chapter 4 BIOS Setup MEMO...
-
Page 95: Chapter 5 Raid & Driver Setup
865Pro-FGR Chapter 5 RAID & Driver Setup Silicon Image SATA RAID and ITE RAID Controller Silicon Image RAID (Redundant Array of Independent Disks) Controller SIL3114 is built in this mainboard to provide RAID configuration of RAID 0, RAID 1, and RAID 0+1 modes. RAID Drivers are enclosed in a Driver CD as well as a Floppy diskette to support various RAID systems (Windows 98SE/ME/2000/XP) setup. -
Page 96: About Disk Array
Chapter 5 RAID & Driver Setup 5-0 About Disk Array 5-0-1 Disk Array Interpretation A “Disk Array” is formed from a group of 2 or more disk drives with the RAID (Redundent Array of Independent Disks) technology. The aim of a Disk Array is to provide better perfornance and/or data fault tolerance. -
Page 97: Enable Silicon Image Sata Raid In System Bios
8 6 5 P r o - F G R To enable Silicon SATA RAID controller, first configure SATA Hard Disks to the SATA connectors. Then boot the 865Pro-FGR system and watch for the following initial screen to appear: Sil 3114 SATARAID BIOS Version 5.0.20 Copyright (C) 1997-2003 Silicon Image, Inc. -
Page 98: Select Silicon Image Sata Raid In System Bios
Chapter 5 RAID & Driver Setup 5-2 Select Silicon Image SATA RAID in System BIOS Enter CMOS BIOS Setup and choose “Advanced BIOS Features” and “Sil3114 Configuration”. Choose either “IDE” or “RAID” to enable the Onboard SATA-RAID interface. IDE or RAID Mode Allows you to configure IDE or RAID mode on SATA RAID Controller SIL3114. -
Page 99: To Enter Raid Bios Setup
865Pro-FGR 5-3 To Enter RAID BIOS Setup Boot the 865Pro-FGR system with “RAID Interface” enabled in system BIOS Setup and watch for the following initial screen to appear: Sil 3114 SATARAID BIOS Version 5.0.20 Copyright (C) 1997-2003 Silicon Image, Inc. -
Page 100: Creating Raid
Chapter 5 RAID & Driver Setup 5-4 Creating RAID 1.When you press <Enter> on the “Create RAID set” bar, the following screen shows up. Press the “Arrow” key to select the RAID mode you want to set up with and then press <Enter> on the RAID bar to select the RAID0,1 or 0+1 mode. -
Page 101: Deleting Raid
865Pro-FGR 5-5 Deleting RAID 1.To remove one or more RAID sets, select “Delete RAID set”. 2. Select the destination RAID set and press Enter. 3. Press “Y” to perform the configuration or press “N” to abandon. 4. The drives will return the original condition where a new RAID set can be created. -
Page 102: To Install Sil3114 Sata/Sata Raid Driver
Chapter 5 RAID & Driver Setup 5-7 To Install Sil3114 SATA/SATA RAID Driver Silicon Image Sil3114 RAID Driver is incorporated in Support CD/Floppy Diskette for user’s installation. This driver is intended for Windows 98/ Me/NT4/2000/XP/2003. 5-7-1 Install SATA/SATA RAID Driver on Windows 2000/XP (1) Get ready the Floppy Diskette holding the RAID Driver. - Page 103 865Pro-FGR (6) On next screen press “S” to confirm the mass storage device setup. Windows Setup Setup could not determine the type of one or more mass storage devices installed in your system, or you have chosen to manually specify an adapter. Currently, Setup will load support for the following mass storage devices(s): <none>...
- Page 104 Chapter 5 RAID & Driver Setup (8) On next screen appearing, choose the driver suitable for your operating system and press <Enter> to continue. Windows Setup You have chosen to configure a SCSI Adapter for use with Windows, using a device support disk provided by an adapter manufacturer. Select the SCSI Adapter you want from the following list, or press ESC to return to the previous screen.
- Page 105 865Pro-FGR 5-7-2 Sil3114 SATA RAID Driver on Windows 98SE/Me For Windows 98SE/Me users of SATA RAID interface supported by Sili- con Image SIL3114 SATA RAID Controller, please pay attention to the following extraordinary configuration in BIOS Setup: When Windows 98SE/Me system is to be installed on SATA RAID interface, the configuration of “Sil3114 Configuration”...
- Page 106 Chapter 5 RAID & Driver Setup (9) Instantly, the “PCI RAID Controller Properties“ screen shows up. Please click the “General” bar to continue. (10) In the “General” screen, click “Reinstall Driver” button to continue. Please note that the status of “Device Usage” should stay at “Exists in all hardware profiles”.
- Page 107 8 6 5 P r o - F G R To set up ITE Parallel RAID system, first set up IDE hard disks to IDE3 and IDE4 connectors and then boot the 865Pro-FGR system and watch for the following initial screen to appear: IT8212 RAID BIOS V1.4.1.6 F/W Ver 02093030...
- Page 108 Chapter 5 RAID & Driver Setup 5-8-1 ITE RAID Setup 1.For quick installation of RAID, please select <1> to enter Auto configuration to set up RAID mode. IT8212 Setup Utility (C)Copyright 2002-2003 ITE, Inc. Main Menu Auto Configuration....[1] Define RAID......[2] Delete RAID......[3] Rebuild RAID......[4] RAID Card Configuration..[5]...
- Page 109 865Pro-FGR 3. When the RAID mode has been selected and is to be created, a message appears as illustrated below. Press <Y> to continue or <ANY KEY> to go back. IT8212 Setup Utility (C)Copyright 2002-2003 ITE, Inc. Auto Configuration Menu...
- Page 110 Chapter 5 RAID & Driver Setup 5-8-2 To Install ITE RAID Driver ITE RAID Driver is incorporated in Support CD/Floppy Diskette for user’s installation. This driver is intended for Windows 98/Me/NT4/2000/XP/ 2003. To install ITE RAID driver, please refer to the Silicon Image RAID Driver Setup illustrated in the former sections of this chapter.
Need help?
Do you have a question about the 865Pro-FGR and is the answer not in the manual?
Questions and answers