Memory; Bios; Multi-I/O Function - SOLTEK SL-65ME User Manual

--- Integrated IDE controller; ICH2 supports Ultra ATA33/66/100.
--- USB host interface with support for 4 USB ports.
--- AC'97 2.1 Compliant Link for Audio and Telephony CODECs.
--- Firmware Hub (FWH) interface support.
--- Alert On LAN.

1-4 MEMORY

• Provides 3pcs DIMM slots supporting double-sided DIMMs.
• Supports 100/133MHz SDRAM spec.
• Supports total memory from 32MB to 512MB using 32Mb/64Mb/128Mb/
256Mb technology.
• Supports up to 3 double sided DIMMs at 100MHz system memory bus.
• Supports up to 2 double sided or 3 single sided DIMMs at 133MHz sys-
tem memory bus.
• Unbuffered , Non-ECC SDRAM only supported.

1-5 BIOS

• Award BIOS 6.0
• Supports Plug & Play (PnP).
• FLASH MEMORY for easy upgrade.
• Supports Advanced Power Management (APM) Rev 1.2 function.
• Supports Advanced Configuration Power Management Interface (ACPI)
Rev 1.0 function.
• Year 2000 compliant.

1-6 MULTI-I/O FUNCTION

• One floppy port supports up to 2.88MB.
• provides 4 Built-in USB connector ports.(Besides the direct use of USB0
and USB1, the others need optional USB connector cable)
• Ultra ATA33/66/100 bus master IDE supports up to 4 IDE devices. (Including
ZIP / LS-120 floppy devices)
• 2x 16550A Built-in fast UART compatible serial port connectors.
• Built-in SPP / EPP / ECP parallel port connectors.
• Built-in standard IrDA TX / RX header.
• Peripherals boot function with ATX power.
65M E / 65ME+
7