Table of Contents
Advertisement
Upload All Parameters
To upload and store parameters in the control panel from the VFD,
perform the following procedure:
1.
Select MENU (SOFT KEY 2). The Main menu will be
displayed.
2.
Use the UP or DOWN keys to highlight PAR BACKUP on
the display screen and press ENTER (SOFT KEY 2).
3.
Use the UP or DOWN keys to highlight UPLOAD TO
PANEL and press SEL (SOFT KEY 2).
4.
The text "Copying Parameters" will be displayed with a
progress indicator. To stop the process, select ABORT
(SOFT KEY 1).
5.
When the upload is complete, the text "Parameter upload
successful" will be displayed.
6.
The display will then return to the PAR BACKUP menu.
Select EXIT (SOFT KEY 1) to return to the main menu.
7.
The control panel can now be disconnected from the drive.
Download All Parameters
To download all parameters from the control panel to the VFD,
perform the following procedure:
1.
Install the control panel with the correct parameters onto
the VFD.
2.
Select MENU (SOFT KEY 2). The Main menu will be
displayed.
3.
Use the UP or DOWN keys to highlight PAR BACKUP on
the display screen and press ENTER (SOFT KEY 2).
4.
Use the UP or DOWN keys to highlight DOWNLOAD
TO DRIVE ALL and press SEL (SOFT KEY 2).
5.
The text "Restoring Parameters" will be displayed with a
progress indicator. To stop the process, select ABORT
(SOFT KEY 1).
6.
When the download is complete, the text "Parameter
download successful" will be displayed.
7.
The display will then return to the PAR BACKUP menu.
Select EXIT (SOFT KEY 1) to return to the main menu.
8.
The control panel can now be disconnected from the drive.
Download Application Parameters
To download application parameters only to the control panel
from the VFD, perform the following procedure:
1.
Install the control panel with the correct parameters onto
the VFD.
2.
Select MENU (SOFT KEY 2). The Main menu will be
displayed.
3.
Use the UP or DOWN keys to highlight PAR BACKUP on
the display screen and press ENTER (SOFT KEY 2).
4.
Use the UP or DOWN keys to highlight DOWNLOAD
APPLICATION and press SEL (SOFT KEY 2).
5.
The text "Downloading Parameters (partial)" will be dis-
played with a progress indicator. To stop the process,
select ABORT (SOFT KEY 1).
6.
When the download is complete, the text "Parameter
download successful" will be displayed.
7.
The display will then return to the PAR BACKUP menu.
Select EXIT (SOFT KEY 1) to return to the main menu.
8.
The control panel can now be disconnected from the drive.
CLOCK SET MODE
Use the clock set mode to set the date and time for the internal
clock of the VFD. In order to use the timer functions of the VFD
control, the internal clock must be set. The date is used to deter-
mine weekdays and is visible in the fault logs.
To set the clock, perform the following procedure:
1.
Select MENU (SOFT KEY 2). The Main menu will be
displayed.
2.
Use the UP or DOWN keys to highlight CLOCK SET on
the display screen and press ENTER (SOFT KEY 2). The
clock set parameter list will be displayed.
3.
Use the UP or DOWN keys to highlight CLOCK VISIBIL-
ITY and press SEL (SOFT KEY 2). This parameter is used to
display or hide the clock on the screen. Use the UP or DOWN
keys to change the parameter setting. Press OK (SOFT KEY
2) to save the configuration and return to the Clock Set menu.
4.
Use the UP or DOWN keys to highlight SET TIME and
press SEL (SOFT KEY 2). Use the UP or DOWN keys to
change the hours and minutes. Press OK (SOFT KEY 2) to
save the configuration and return to the Clock Set menu.
5.
Use the UP or DOWN keys to highlight TIME FORMAT and
press SEL (SOFT KEY 2). Use the UP or DOWN keys to
change the parameter setting. Press OK (SOFT KEY 2) to
save the configuration and return to the Clock Set menu.
6.
Use the UP or DOWN keys to highlight SET DATE and
press SEL (SOFT KEY 2). Use the UP or DOWN keys to
change the day, month, and year. Press OK (SOFT KEY 2)
to save the configuration and return to the Clock Set menu.
7.
Use the UP or DOWN keys to highlight DATE FORMAT
and press SEL (SOFT KEY 2). Use the UP or DOWN keys
to change the parameter setting. Press OK (SOFT KEY 2) to
save the configuration and return to the Clock Set menu.
8.
Press EXIT (SOFT KEY 1) twice to return to the main menu.
I/O SETTINGS MODE
Use the I/O Settings mode to view and edit the I/O settings.
To configure the I/O settings, perform the following procedure:
1.
Select MENU (SOFT KEY 2). The Main menu will be
displayed.
2.
Use the UP or DOWN keys to highlight I/O SETTINGS
on the display screen and press ENTER (SOFT KEY 2).
The I/O Settings parameter list will be displayed.
3.
Use the UP or DOWN keys to highlight the desired I/O
setting and press SEL (SOFT KEY 2).
4.
Use the UP or DOWN keys to select the parameter to
view. Press OK (SOFT KEY 2).
5.
Use the UP or DOWN keys to change the parameter setting.
Press SAVE (SOFT KEY 2) to save the configuration. Press
CANCEL (SOFT KEY 1) to keep the previous value. Any
modifications that are not saved will not be changed.
6.
Press EXIT (SOFT KEY 1) twice to return to the main menu.
28
Advertisement
Table of Contents
