References; Callp Checkpointing Support; System Management Console - Nortel 5100 Release Note

•
•

References

For more information, see the following documents:
•
•
•
•

CallP checkpointing support

This feature affects the following MCS components:
•
•
•
•

System Management Console

The System Management Console is used to configure the queue
thresholds. The queue thresholds control the overload limits.
The default CallQueueThresholds field is 70,100. This means that when
the queue is between 70 and 100 calls, a severe alarm is raised. If the
queue is below 70, no alarm is raised. When two numbers are configured,
only one alarm (Severe) is raised.
The CallQueueThresholds field can hold four values, An example of the
field contents is 60,70,85,100. The values are defined according to the
following table.
Table 9
Call queue alarm thresholds
Call queue size
less than the first value
(for example, less than 60)
Copyright © 2007, Nortel Networks
.
SesmFailedCalls: The OM counts the number of failed attempts to set
up a call on any available BCP on the Session Manager in the last
collection period.
mediaPortalCount: The OM counts the number of BCPs configured to
support the Session Manager from the System Management Console.
This counter is updated when BCPs are added or removed using the
System Management Console.
Border Control Point Fundamentals (NN42020-108)
MCS 5100 Overview (NN42020-143)
Operational Measurements Reference (NN42020-704)
Session Manager Fundamentals (NN42020-107)
System Manager
System Management Console
Accounting Manager
Operational Measurements
Nortel Multimedia Communication Server 5100
New in this Release
NN42020-404 03.08 Standard
Release 4.0 11 September 2007
CallP checkpointing support 55
Alarm level
none