Trim Tab Adjustment - TOHATSU M 15D2 Owner's Manual

52
ADJUSTMENT
To adjust the friction of the remote con-
trol lever, turn the throttle friction
adjustment screw on the front of the
remote control. The friction may be
increased by turning clockwise and
decrease by turning counter-clockwise.
2
1
1. Throttle friction adjustment screw
2. Lighter
3. Heavier
ENOM00076-0

4. Trim tab adjustment

ENOW00076-1
9
Be sure that the outboard motor is
secured to transom or service stand, or
accidental drop or fall of outboard motor
could lead to severe personal injury.
Be sure to lock the outboard motor in the
tilt up position, or accidental fall of out-
board motor could lead to severe per-
sonal injury.
Do not go under outboard motor in the tilt
up position and locked, or accidental fall
of outboard motor could lead to severe
personal injury.
ENOW00075-0
Inappropriate adjustment of trim tab could
cause steering difficulty. After installing or
3
ENOF00078-2
WARNING
WARNING
readjusting trim tab, check if steering fiction
is even.
If straight-line cruising can not be
achieved, adjust the trim tab located
under the anti-ventilation plate.
If the boat veers toward the left direct
the trim tab towards A (left from rear
of boat).
If the boat veers toward the right
direct the trim tab towards B (right
from rear of boat).
1. Trim tab
ENON00022-A
Notes
After adjustment securely tighten the
trim tab fixing bolt.
Check for looseness of the bolt and the
trim tab at regular intervals.
1
ENOF02449-0