Part 3.8: Eeprom 24Lc04 - Alinx ARTIX-7FPGA User Manual

USB to serial port pin assignment:

Part 3.8: EEPROM 24LC04

AX7013 carrier board contains an EEPROM, model 24LC04, and has a
capacity of 4Kbit (2*256*8bit). It consists of two 256-byte blocks and
communicates via the IIC bus. The onboard EEPROM is to learn how to
communicate with the IIC bus. The I2C signal of the EEPROM is connected to
the BANK14 IO port on the FPGA side. Figure 3-8-1 below shows the design of
the EEPROM
www.alinx.com
ARTIX-7 FPGA Development Board AX7203 User Manual
Signal Name
UART1_RXD
UART1_TXD
Figure 3-8-1: EEPROM Schematic
Figure 3-8-2: EEPROM on the Carrier board
FPGA PIN
P20
N15
47 /