Alinx ARTIX-7FPGA User Manual page 8

The KSZ9031RNX
transmission rates; full duplex and adaptive.
 1-channel HDMI Output interface
Silion Image's SIL9134 HDMI encoding chip is selected to support up to
1080P@60Hz output and support 3D output.
 1-channel HDMI Input interface
Silion Image's SIL9013 HDMI decoder chip is selected, which supports
up to 1080P@60Hz input and supports data output in different formats.
 1-channel Uart to USB interface
1 Uart to USB interface for communication with the computer for user
debugging. The serial port chip is the USB-UAR chip of Silicon Labs
CP2102GM, and the USB interface is the MINI USB interface.
 Micro SD card holder
1-port Micro SD card holder, support SD mode and SPI mode
 EEPROM
Onboard an IIC interface EEPROM 24LC04
 2-way 40-pin expansion port
2-way 40-pin 2.54mm pitch expansion port can be connected to
various ALINX modules (binocular camera, TFT LCD screen,
high-speed AD module, etc.). The expansion port contains 1 channel
5V power supply, 2 channel 3.3V power supply, 3 way ground, 34 IOs
port.
 JTAG Interface
A 10-pin 0.1inch spacing standard JTAG ports for FPGA program
download and debugging.
 keys
2 keys; 1 reset key (on the core board)
 LED Light
5 user LEDs (1 on the core board and 4 on the carrier board)
www.alinx.com
ARTIX-7 FPGA Development Board AX7203 User Manual
chip supports 10/100/1000 Mbps network
8 / 57