Image Management (Qg) - GE LOGIQ C Series Basic Service Manual

GE
D 5273008-100, R
IRECTION
4-3-12-2 Quickly Move to Start/End Frame
Press First to move to the first CINE frame; press Last to move to the last CINE frame.
4-3-12-3 Start Frame/End Frame
Press the Start Frame Two-Button Softkey to move to the beginning of the CINE Loop. Adjust the Start
Frame up/down Two-Button Softkey upward to move forward through the CINE Loop. Adjust the
Softkey downward to move backward through the CINE Loop.
Press the End Frame Two-Button Softkey to move to the end of the CINE Loop. Adjust the End Frame
up/down Two-Button Softkey upward to move forward through the CINE Loop. Adjust the Softkey
downward to move backward through the CINE Loop.
4-3-12-4 Adjusting the CINE Loop Playback Speed
Adjust the Loop Speed up/down Two-Button Softkey to increase/decrease the CINE Loop playback
speed.
4-3-12-5 Moving through a CINE Loop Frame By Frame
Adjust the Frame by Frame up/down Two-Button Softkey to move through CINE memory one frame at
a time.
4-3-13

Image Management (QG)

For Image Management functionality refer to the LOGIQ C Series Quick Guide. It talks about several
topics:
• Clipboard*
• Printing Images
• Browsing and Managing an Exam's Stored Image
• Connectivity, and Dataflow Concept and Creation
• Starting an Exam
• Configuring Connectivity
• TCP/IP
• Services (Destinations)
• Buttons
• Views
• Verifying and Pinging a Device
Clipboard* function is not available on LOGIQ C2 PRO.
NOTICE
9
EVISION
Chapter 4 Functional Checks
LOGIQ C S B S
ERIES ASIC
M
ERVICE ANUAL
4 - 25