Using Cine; Activating Cine; Image Management (Qg); Cf Checks - GE LOGIQ A3 Basic Service Manual

GE H
EALTHCARE
D 5213326-100, R
IRECTION
4-4-7

Using Cine

4-4-7-1

Activating CINE

Press FREEZE, Then cine guage appears on the bottom of submenu. Use "Trackball" to move frame
by frame or Gain key. Press "Numeric Key 2" to start cine loop.
4-4-8

Image Management (QG)

For Image Management functionality refer to the LOGIQ™ A3 Quick Guide. It talks about several topics:
• Clipboard
• Internal Memory
• Starting an Exam
4-4-9

CF Checks

If all the previous tests have been passed successfully, the CF is most likely OK. If the system seems
to be operating erratically, Please refer to Chapter7, Diagnostic/Troubleshooting.
4-4-10

Software Configuration Checks

Table 4-9
Step
1.
Check Date and Time setting
Check that Location (Hospital Name and
2.
Department) is correct
3.
Check Language setting
4.
Check Units setting
5
Check assignment of Printer Keys
Check that all of the customer's options are
6
set up correct
Section 4-5Peripheral Checks
Check that peripherals work as described below:
Table 4-10
Step
1.
Press(FREEZE)
Press (PRINT 1) or (PRINT2) on the Control panel
2.
Press B MODE on the Control Panel
3.
Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 98 of 252
3
EVISION
Software Configuration Checks
Task to do
Date and Time are correct
Location Name is correct
Language is proper
Units are proper
Print1-2 Keys are assigned as desired by the
customer
All authorized functions are enabled

Peripheral checks

Task to do
Expected Result(s)
Stop image acquisition.
The image displayed on the screen is printed on B&W,
depending on the key assignment configuration.
to return to the scanning mode
Chapter 4
LOGIQ™ A3 S
ERVICE
Adjust the Date and Time setting
Re-enter the correct Location Name
Set the proper Language
Set the local units
Expected Result(s)
M
ANUAL
4-11