Extension Export/Import Using Confextn - Nortel Viewer User Manual

September 2007

Extension Export/Import using ConfExtn

When you use the configuration type ConfExtn to export/import extensions,
you can use the format, as shown in the following examples.
ConfExtn,Site,Recorder,Extension,Mode CR
In the above instruction, five fields are used. ConfExtn (1), Site (2),
Recorder (3), Extension (4), Mode (5). Each command is described in
Extension Field Descriptions. Note that CR means Carriage Return. If a
value is not inserted, the comma separator must still be used, as shown in
example 2 below.
Example 1
ConfExtn,"Yaesu, Japan",600001,4001,All CR
In this example extension 4001 is configured to record all calls on recorder
serial number 600001 which is located at site Yaesu in Japan. Quotation
marks are used to accommodate the comma used in the Yaesu, Japan (the
location of the recorder). Without quotation marks, the comma would be
recognized as a separator, invalidating the ConfExtn declaration, which
must contain only five values.
Example 2
ConfExtn,Yaesu,,4001,All CR
In this example extension 4001 is configured to record all calls on all
recorders at site Yaesu. The "all recorders" is indicated by the absence of a
value after recorder location. Instead of a value, an additional comma
indicates that no specific recorder is included and the default "all recorders"
is used. The integrity of the five-instruction command line is thus retained.
Notice also that a comma does not separate the carriage return (CR)
User Guide
Understanding Export Formats
87