Extreme Networks ExtremeMobility AP410i/e Installation Manual
  1. Manuals
  2. Brands
  3. Extreme Networks Manuals
  4. Wireless Access Point
  5. ExtremeMobility AP410i/e
  6. Installation manual

Extreme Networks ExtremeMobility AP410i/e Installation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
™
ExtremeMobility
Access
Points AP410i/e
Installation Guide
9036459-00 RevAA
Published November 2019

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ExtremeMobility AP410i/e and is the answer not in the manual?

Questions and answers

Related Manuals for Extreme Networks ExtremeMobility AP410i/e

Summary of Contents for Extreme Networks ExtremeMobility AP410i/e

  • Page 1 ™ ExtremeMobility Access Points AP410i/e Installation Guide 9036459-00 RevAA Published November 2019...
  • Page 2 Copyright © 2019 Extreme Networks, Inc. All rights reserved. Legal Notice Extreme Networks, Inc. reserves the right to make changes in specifications and other information contained in this document and its website without prior notice. The reader should in all cases consult representatives of Extreme Networks to determine whether any such changes have been made.

  • Page 3: Table Of Contents

    Table of Contents Preface........................................ 4 Conventions..................................... 4 Providing Feedback to Us..............................5 Getting Help.....................................5 Documentation and Training............................6 Related Publications................................6 Purchase Order Information............................7 Chapter 1: Product Overview....................8 AP410i/e Features................................8 AP410i/e Power Source..............................9 LED Indicators..................................9 Chapter 2: Install the Access Point..................10 AP410i/e Box Contents..............................

  • Page 4: Preface

    Preface This section discusses the conventions used in this guide, ways to provide feedback, additional help, and other Extreme Networks ® publications. Conventions This section discusses the conventions used in this guide. Text Conventions The following tables list text conventions that are used throughout this guide.

  • Page 5: Providing Feedback To Us

    Providing Feedback to Us Quality is our first concern at Extreme Networks, and we have made every effort to ensure the accuracy and completeness of this document. We are always striving to improve our documentation and help you work better, so we want to hear from you! We welcome all feedback but especially want to know about: •...

  • Page 6: Documentation And Training

    White papers, data sheets, case studies, https://www.extremenetworks.com/resources/ and other product resources Training Extreme Networks offers product training courses, both online and in person, as well as specialized certifications. For more information, visit www.extremenetworks.com/education/. Related Publications ExtremeWireless ™ , ExtremeWireless WiNG ™...

  • Page 7: Purchase Order Information

    • ExtremeWireless External Antenna Site Preparation and Installation Guide • ExtremeWireless External Antenna with Wave 2 Site Preparation and Installation Guide • ExtremeWireless Getting Started Guide • ExtremeWireless Integration Guide • ExtremeWireless Maintenance Guide • ExtremeWireless Open Source Declaration • ExtremeWireless User Guide •...

  • Page 8: Chapter 1: Product Overview

    Product Overview AP410i/e Features AP410i/e Power Source LED Indicators The AP410i/e access points are indoor model 802.11ax access points. The “i” in AP410i indicates that the access point comes with internal antennas and the “e” indicates that it comes with external antenna connectors.

  • Page 9: Ap410I/E Power Source

    Product Overview • AP410i: Eight WiFi internal antennas and one BLE internal antenna • AP410e: Six RP-SMA external antenna ports and one BLE RP-SMA antenna • Temperature: • AP410i: 0°C to +50°C (32°F to +122°F) @ 6000 ft. • AP410e: -20°C to +55°C (-4°F to +131°F) @ 6000 ft. •...

  • Page 10: Chapter 2: Install The Access Point

    Verify the contents. 2 Visually inspect the access point, the bracket, and any other optional accessories you have ordered for physical damage. Contact Extreme Networks Support if there is any damage. 3 Read and review the safety guidelines. AP410i/e Box Contents...

  • Page 11: Access Point Installation Options And Accessories Information

    Install the Access Point Quantity Item Note All optional brackets and accessories are sold separately. Access Point Installation Options and Accessories Information The access point comes with the main mounting bracket (#37201; mounting bracket for 802.11ax indoor access points). There are various optional brackets, bracket adapters, and accessories that can be purchased separately.

  • Page 12: Install The Access Point On A Drywall Or Wood Wall Or To A Solid Flat Ceiling

    Install the Access Point Table 7: Brackets and accessories usage for various installation options (continued) Mounting Wall Solid Ceiling Ceiling Juncti Beam Ceiling tile T-bar Notes bracket or install flat install install on box install protrusion widths accessory ceiling (T-bar) (protrude install install...
  • Page 13 Install the Access Point Install the Access Point Using the Main Mounting Bracket The main mounting bracket is a stainless-steel bracket that ships with the access point. It is used during drywall or wood wall installation, or solid flat ceiling installation. The best practice is to use the main mounting bracket for all wall installations.
  • Page 14 Install the Access Point Callout Description Main mounting bracket mounting holes Main mounting bracket feet 2 Insert the Phillips pan head screws into the main mounting bracket holes and attach the bracket to the wall. Use screw-in anchors, if needed. 3 Connect the Ethernet cable RJ45 connector into the GE1 port.
  • Page 15 Install the Access Point Callout Description Security torx locking screw stop feature Note You cannot remove the access point from the main mounting bracket until the security torx locking screw is removed. Install the Access Point Using the WALL04 Bracket The optional WALL04 (#30516) bracket is used for wall installations and ships with two Phillips pan head screws and two screw-in anchors.
  • Page 16 Install the Access Point Keep the adapter to the center of the main mounting bracket, push and rotate it. Figure 3: Flat metal easy-attach adapter being attached to the main mounting bracket 2 Using the attachment holes on the easy-attach adapter, mark and drill two hole centers on a wall or a solid flat ceiling.

  • Page 17: Install The Access Point On A Suspended Or Drop Ceiling With A Flat T-Bar

    Install the Access Point 5 Place the access point onto the bracket feet and slide it down to lock it in place. Note The bracket feet must be pointing up. Install the Access Point Directly on a Wall If you do not want to use the main mounting bracket that ships with the access point, you can install the access point directly on a wall using two phillips pan head screws.
  • Page 18 Install the Access Point • T-bar maximum base thickness must not exceed 0.055 in. (1.4 mm). • Ceiling tile over the T-bar must be flat, all the way across. The main mounting bracket is used on a T-bar when the ceiling model is a suspended or drop ceiling and when there is a T-bar on the ceiling.
  • Page 19 Install the Access Point Install the Access Point on a Flat T-bar Using Main Mounting Bracket and KT-135628-01 Adapter Ensure that the T-bar meets the following conditions before installing the main mounting bracket with the KT-135628-01 adapter on a T-bar: •...
  • Page 20 Install the Access Point Callout Description KT-135628-01 adapter KT-135628-01 T-bar holder KT-135628-01 adapter locking pin 3 Slide the KT-135628-01 T-bar holder onto the T-bar and replace the tiles to hold the adapter onto the T-bar. 4 Hold and rock the access point back and forth to ensure that it is securely mounted. 5 Attach the RJ45 connector to the GE1 port.
  • Page 21 Install the Access Point Callout Description T-bar Movable sliding part of the DCFLUSH bracket 3 Hook the stationary end of the bracket onto the T-bar. 4 Tilt the T-bar up slightly in such a way that you are holding the stationary and movable sides of the bracket.

  • Page 22: Install The Access Point On A Junction Box Or Gang Box

    Install the Access Point 2 Open the movable sliding part of the DCMTR01 bracket to give the stationary end of the bracket and the slider T-bar more space. Figure 7: DCMTR01 bracket parts and T-bar Callout Description T-bar Movable sliding part of the DCMTR01 bracket Stationary part of the DCMTR01 bracket 3 Hook the stationary end of the bracket onto the T-bar.

  • Page 23: Install The Access Point On A Beam

    Install the Access Point 2 Remove the LAN cable from the coverplate. 3 Place the WALL04 bracket, with the locking tab pointing up, against the mounting holes on the box. Note The bracket must be square to the rest of the room walls, and the two holes that are being used must be on the opposite side of large center hole on the WALL04 bracket.
  • Page 24 Install the Access Point Attach the beam clip to the main mounting bracket. Slide the beam clip accessory into the rear hinges on either side of the main mounting bracket and slightly twist it until the clip locks into place. Figure 9: Beam clip accessory attached to the main mounting bracket 2 Place the access point onto the main mounting bracket feet and slide it down to lock it in place.
  • Page 25 Install the Access Point 4 Tighten the beam clip accessory screw to secure the access point in place. Figure 10: Beam clip accessory attached to a beam 5 Connect the Ethernet cable RJ45 into the GE1 port. ExtremeMobility™ Access Points AP410i/e...

  • Page 26: Chapter 3: Antenna Configuration For External Antenna Model Access Point

    Antenna Configuration for External Antenna Model Access Point Figure 11: AP410e external antennas Note The sensor and the BLE antennas come with dust caps on them. Do not remove the dust cap until you need to install the antennas. ExtremeMobility™ Access Points AP410i/e...
  • Page 27 Antenna Configuration for External Antenna Model Access Point Antenna socket radio mapping information • Radio 1 (R1) - antennas 1 and 2 • Radio 2 (R2) - antennas 1, 2, 3, and 4 • Radio 3 (R3) - antennas 5 and 6 •...

  • Page 28: Chapter 4: Access Points Specifications

    Access Points Specifications Physical specifications Item Specification Housing Plastic Seven Radios Three 802.11ax radios Console port RJ45 Cloud enabled Environmental specifications Item Specification Operating temperature AP410i: 0°C to +50°C (32°F to +122°F) AP410e: 20°C to +55°C (-4°F to +131°F) Operating altitude 6000 ft.

  • Page 29: Chapter 5: Regulatory Information

    Regulatory Information Safety Guidelines MPE Statement for Mobile Devices Federal Communications Commission (FCC) Notice Industry Canada Notice Detachable Antenna Usage Australia Notice Brazil Anatel Statement Hazardous Substances Supplement to Product Instructions NCC Statement CE Information European Waste Electrical and Electronic Equipment (WEEE) Notice Declaration of Conformity in Languages of the European Community Safety Guidelines The following safety guidelines are intended to protect your personal safety and prevent damage to the...

  • Page 30: Industry Canada Notice

    Regulatory Information a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: •...

  • Page 31: Detachable Antenna Usage

    Regulatory Information Warning IC Radiation Exposure Statement: This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 39 cm between the radiator and your body. Warning Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements ISED établies pour...

  • Page 32: Australia Notice

    Regulatory Information Group Brand Model number Antenna type Antenna gain (dBi) 2.4 GHz 5 GHz BLE or thread Extreme WS-AO- Omni DQ04360N Extreme AI-DQ04360S Omni Extreme ML-2452- Panel 6.92 7.23 SEC6M4-036 / WS-AI- DQ05120 Extreme WS-AI- Panel DE07025 Extreme ML-2452- Panel 1 10.7 PNA7-01R...

  • Page 33: Supplement To Product Instructions

    Regulatory Information Supplement to Product Instructions NCC Statement 功率電波輻射性電機管理辦法 第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號 或使用者均不得 擅自變更頻率、加大功率或變更原設計之特性及功能。 第十四條低功率射頻電機之 使用不得影響飛航安全及干擾合法通信；經發現有干擾現 象時，應立即停用，並改善至無干擾時方 得繼續使用。前項合法通信，指依電信法規 定作業之無線電通信。低功率射頻電機須忍受合法通信 或工業、科學及醫療用電波輻 射性電機設備之干擾。 無線資訊傳輸設備避免影響附近雷達系統之操 作。 本器材須經專業工程人員安裝及設定，始得設置使用，且不得直接販售給一般消費者 CE Information Warning CE co-location MPE Statement: This equipment complies with CE radiation exposure limits set forth for an uncontrolled environment.

  • Page 34: European Waste Electrical And Electronic Equipment (Weee) Notice

    Regulatory Information Table 8: All operational modes Frequency AP410i AP410e 2.4 GHz 802.11b, 802.11g, 802.11n (HT20), 802.11b, 802.11g, 802.11n (HT20), 802.11n (HT40), 802.11ax (HEW20), 802.11n (HT40), 802.11ac (VHT20), 802.11ax (HEW40), 802.15.4 802.11ac (VHT40), Bluetooth(BR/ (Thread), Bluetooth (LE) EDR, LE) 5 GHz 802.11a, 802.11n (HT20), 802.11n 802.11a, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac...

  • Page 35: Declaration Of Conformity In Languages Of The European Community

    EU-conformiteitsverklaring u contact opnemen met extreme regelgeving op compliancerequest@extremenetworks.com French Par la présente Extreme Networks déclare que l'appareil Radio LAN device (AP410i/e) est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 2014/53/EU. Pour obtenir le texte intégral du processus de Déclaration de la...
  • Page 36 παρακαλούμε επικοινωνήστε με την ακραία κανονιστική συμμόρφωση στο compliancerequest@extremenetworks.com Icelandic Extreme Networks lysir her med yfir að thessi bunadur, Radio LAN device (AP410i/e), uppfyllir allar grunnkrofur, sem gerdar eru i R&TTE tilskipun ESB nr 2014/53/EU. Fyrir fullan texta í ESB yfirlýsingu um samræmi, vinsamlegast hafðu samband við...
  • Page 37 Regulatory Information Portuguese Extreme Networks declara que este Radio LAN device (AP410i/e) está conforme com os requisitos essenciais e outras disposições da Directiva 2014/53/EU. Para o texto integral da declaração de conformidade da UE, contacte a conformidade regulamentar extrema em compliancerequest@extremenetworks.com...

  • Page 38: Index

    Index features (continued) safety hanger 8 access points specifications temperature 8 environmental specifications 28 USB 8 physical specifications 28 flat t-bar install power specifications 28 DCFLUSH bracket 17 antenna configuration 26, 27 DCMTR01 bracket 17 antennas KT-135628-01 adapter 17 external antennas 8 main mounting bracket 17 internal antennas 8 Australia notice 32 installation options beam install 11 beam install junction box install 11...
  • Page 39 Index product overview AP410e access point 8 AP410i access point 8 purchase order information bracket accessories beam clip accessory 7 flat metal easy-attach adapter 7 KT-135628-01 7 RJ45 flat cable accessory 7 mounting brackets main mounting bracket 7 WS-MBI-DCFLUSH bracket 7 WS-MBI-DCMTR01 bracket 7 WS-MBI-WALL04 bracket 7 power supply 7 Regulatory Information 33 Regulatory Information, Hazardous Substances 32 safety guidelines 29 security torx locking screw...

Table of Contents