Honda BF15D Manual page 84

BF15DmBF20D
c. ASSEMBLY
~
12
6 x 5 0 m m
WASH [2] WATER TUBE SEAL
N*m (1
[3] IMPELLER HOUSING
~ _ _ _ _ _
[4] IMPELLER COVER
[9] IMPELLER LINER
/ [6] WATER PUMP
HOUSING GASKET
1)
Install a impeller gasket by aligning the cutout with the
boss of the water pump housing.
Replace the gasket with new one when the gasket is
removed.
2) Install the impeller cover by aligning the cutout with the
boss of the water pump housing.
3) Apply marine grease to the inside of the impeller liner,
and install the impeller by turning it counterclockwise with
the open end of the key groove toward the bottom of the
motor. Align the holes of the impeller and pump liner.
[2] IMPELLER
I
[l] IMPELLERLINER [2] IMPELLER
/
[3] MARINE
1
[4] KEYGROOVE
o &
GREASE
4-13