Honda BF15D Manual page 249

BF15DmBF20D
15)Apply marine grease to the 6 x 6 mm roller and install it in
the concave of the control wheel as shown.
16)Apply marine grease to the sliding surfaces of the fast
idle cam. Set the fast idle spring to the fast idle cam and
install them onto the idle cam pivot shaft by pushing the
detente roller slightly. Install the 5 mm washer and tight-
en the 5 x 10 mm screw.
17)
Install the 6 mm washer and secure the 4 mm E-clip.
18)lnstall the control box wire harness and indicator and
then connect the connectors.
[3]
5
x
10 mm SCREW
6
x 6 mm ROLLER
[8] CONCAVE
WIRE BAND
141
Align the wire band with the edge
of the control box as shown.
GROMMET
14-1 6