Fuel Filter - Honda BF15D Manual

8. FUEL FILTER
inspection
1)
Remove the engine cover.
2)
Check the fuel filter for water accumulation or sediment. if
water or sediment is found, replace the fuel filter.
Replacement
Gasoline is highly flammable and explosive.
You can be burned or seriously injured when handling
fuel.
Keep heat, sparks, and flame away.
Wipe up spills immediately.
1)
Remove the right engine under cover (P. 3-3 and 4).
2) Pinch the fuel tubes at both sides of the fuel filter with two
commercially available hose clips.
3) Disconnect the fuel tubes being careful to prevent fuel
leakage and remove the fuel filter with filter suspension
attached.
4) Remove the fuel filter from the filter suspension and dis-
cards the fuel filter.
5)
Install a new fuel filter into the filter suspension so the
arrow mark points same direction as shown.
6 ) Install the new fuel filter with the filter suspension
attached so the arrow mark on the filter suspension
points toward the fuel pump side.
7) Connect the fuel tubes and remove the hose clips.
8) Connect the fuel hose connector to the outboard motor.
Pump the primer bulb, and make sure that there is no fuel
leaks.
r i i
TUBE CLIPS
/
[2] FUEL FILTER
(With filter suspension attached)
[3] FUEL FILTER [4] FILTER SUSPENSION
[5] ARROW MARKS
[6] FUEL HOSE CONNECTOR
3-1 1