Honda BF15D Manual page 104

2. LEFT ENGINE UNDER COVER
a. REMOVAL
1) Remove the engine cover and cover latch (P. 5-1).
2) Remove the five 5 x 10 mm washer screws.
3) Pull off the engine under cover from the boss of the oil
case at the front of the outboard motor, then remove the
left engine under cover.
111 5
x 10 mm WASHER SCREW (5)
1
4.5
N * m (0.45 kgf-m, 3.3
Ibfoft)
1
/
/
[3] LEFT ENGINE UNDER COVER
b. INSTALLATION
1) Install the left engine under cover.
At the front side; align the hole of the left engine under
cover to the boss of the oil case
At the rear side; align the groove of the left engine
under cover with the lug of the right engine under
cover and the hole with the boss.
2) Tighten the washer screws securely.
3) Reinstall the cover latch and engine cover (P. 5-1).
TORQUE: 4.5 N*m (0.45 kgfoft,
3.3 Ibfoft)
\
121
EXTENSION GROMMET
(Bodensee Type only)
[ l ] LEFT ENGINE [2] RIGHT ENGINE
UNDER COVER UNDERCOVER
I