Honda BF15D Manual page 280

3. CHARGE RECEPTACLE WIRE
(Type with 6A charge coil)
I
REMOVAL
Remove the following:
-
engine cover (P. 5-1).
-
left engine under cover (P. 5-3).
[2] WHITE WIRE
Remove the fuse holder from the fuse holder bracket.
Pull off the white wire (main fuse line) connectors from
the holder on the starter case B, and disconnect them.
Open the three wire bands and remove the spiral protec-
tors.
Pull off the white wire connector from the connector
bracket A and disconnect the connector.
Open the wire band clip on the battery cable bracket
(From fuse holder)
/
[3] HOLDER
[4] STARTER CASE B
[5] CONNECTOR
[12] CHARGE
PROTECTOR
CLIP (3)
[ l l ] WIRE BAND CLIP [lo] BATTERY CABLE PROTECTOR
BRACKET
16-17