Honda BF15D Manual page 242

CONTROL WHEEL
Remove the 8 x 35 mm hex bolt and washer.
Remove the control lever and control wheel.
Remove the shift link arm.
Remove the 5 x 10 mm self-tapping screw, and remove
the spring set plate, 9 x 10 mm detente roller, spring and
6 mm washer.
Remove the 5 x 10 mm self-tapping screw, 5 mm washer
and neutral switch cam.
Remove the 3 mm E-clip and 4 mm washer, then remove
the friction adjusting rod, 6 mm hex. nut, 4 mm washer
Remove the two 6 x 16 mm self-tapping screws and neu-
tral lock block.
151
5 x l O m m
and friction block.
SELF-TAPPING SCREW
5 mm WASHER
[71
NEUTRAL SWITCH CAM
[4] 8 x 35 mm HEX. BOLT
.
[3]
8
mm WASHER
[2] CONTROL WHEEL
[ l ] 28 mm WASHER
ADJUSTING ROD
6 mm HEX. NUT
1211
SHIFT LINK ARM
THROTTLE FRIC-
9.8 x 27.1 mm SHIFT
DETENTE SPRING
[ l l ] 4 mm WASHER (2)
[12] 3 mm E-CLIP
9 x 10 mm SHIFT
DETENTE ROLLER
SELF-TAPPING SCREW
[13]SPRING SET PLATE
1 1 81
REMOTE CONTROL BOX
HOUSING
11 71
NEUTRAL LOCK BLOCK
--
[161
CONTROL LEVER
[ i 51
k -
6 x l 6 m m
SELF-TAPPING SCREW (2)
14-9