Honda BF15D Manual page 120

BF15DmBFZOD
6) Clump the fuel tube to the hook of the silencer cover.
7)
Install the seal rubber to the silencer cover as shown.
Install the silencer cover to the silencer and tighten the 6
x 22 mm flange bolts to the specified torque.
TORQUE: 9 N*m (0.9 kgf
om,
7 Ibf
e f t )
shown.
8) Insert the tube end to the recess on the oil case as
9) Connect the linkage pivot to the carburetor throttle lever.
10)lnstall the throttle cable stay with the 6 x 14 mm flange
bolt (Tiller handle type). After installation, adjust the throt-
tle linkage (P. 3-1 3).
11)Connect the tube to the tube join of the starter case B,
and set the starter case B securely by setting the grom-
mets to the bosses of the cylinder head cover.
12)Connect the throttle control cable to the throttle arm
(Remote control type). After installation, adjust the throttle
linkage (P. 3-14).
[l] SILENCER
"21 FUEL
TUBE B
COVER
6 x 22 (2)
-
[l] SILENCER
COVER
d
@q
[2] SEAL
RUBBER
[4] TUBE [3] OILCASE
J
CABLE
6-1 5