Honda BF15D Manual page 117

7) Install a new O-ring to the drain screw and install the
8) Install a new O-ring (float chamber seal) onto the float
drain screw
to
the float chamber.
chamber.
9) Install the float chamber to the carburetor body and tight-
en the four washer screws securely.
10)lnstall the throttle stop screw and spring.
1l)lnstall a new O-ring to the SE thermal valve and install
the SE thermal valve with the setting plate and loosely
install the setting screw.
12)Set the SE thermal valve as shown noting the direction
and tighten the set screw securely.
[ l ] FLOAT CHAMBER [2] FLOAT
SEAL CHAMBER
[l] WASHER
~~
SCREW(4)
/
[2] SCREW [31 SET
VALVE
[q
SPRING 141 THROTTLE
STOP
[ l ] SE THERMAL SCREW
VALVE
\
6-12