Honda BF15D Manual page 288

BF15DmBF20D
3) Pull out the following connectors and wires from the con-
nector bracket A, and disconnect the connectors.
-
charge coil wire.
-
exciter coil wire.
-
SE thermal valve heater wire (Type with electric starter).
-
regulatorhectifier wire.
-
main wire harness.
-
starter magnetic switch wire (Type with electric starter).
Refer to page 3-31 (Tiller handle type) or 3-33
(Remote control type) for connector location.
4) Remove the three 6 x 14 mm flange bolts and ignition
control module plate with the connector bracket A
attached.
5) Remove the retaining clip and connector bracket.
1 1
1
CONNECTORS
121
MAIN WIRE
HARNESS
6 x 14 (3)
CONNECTOR
[11
IGNITION CONTROL
MODULE PLATE
RETAINING
16-25