Honda BF15D Manual page 360

BF15DoBF20D
Apply the ATF to two new O-rings, and install the O-rings
in the valve body
Install the smaller O-ring in the lower groove and the
larger O-ring in the upper groove of the valve body
[ l ] O-RING
2.0 x 43.5 mm
i
1
Install
in the upper
groove.
[2] O-RING
2.0 x 34.5 mm
VALVE 131 BODY
/\x<
[11
Apply the ATF to a new O-ring and backup ring, and
install them on the free piston.
FREE PISTON
/
4) Apply the ATF to a new O-ring and install it on the piston
5) Apply the ATF to the inner wall of the cylinder.
6)
Install the free piston in the cylinder and pour the fresh
ATF to the free piston.
7) Install the piston rod in the cylinder from the chamfered
ends at the inside of the cylinder and push in the piston
rod until the piston rod end aligns with the cylinder end as
shown.
rod.
Take care not to damage the free piston O-ring and back-
up ring and the piston rod O-ring.
w , r 2 1 BACKUP RING
[31
4 .
O-RING
2.4 x 27.7 mm
O-RING 2.0 x 28.5 mm
A L
/
L
[3] FREE PIS TON
[4] CHAMFERED
[5] CYLINDER
12-31