Honda BF15D Manual page 260

BF15DmBF20D
b. ASSEMBLY
1) Install the throttle cable on the tiller handle by aligning
the setting groove of the cable outer into the concave of
the tiller handle as shown. Set the cable set plate and
tighten the two
4
x 12 mm self-tapping screws. securely.
TORQUE: 1.5 N * m (0.15 kgf*m, 1.1 Ibf*ft)
2)
Install the emergency
stop
switch if it is removed.
[11
P I
THROTTLE CABLE
1 3 1
4 X 1 2 m m
CABLE GROOVE SELF-TAPPING
15-9