Honda BF15D Manual page 273

13)lnstall the rear bracket and align the index mark on the
14)lnstall the starter suspension onto the yoke.
15)Apply oil to new O-rings and install the set plate and the
O-ring to each through bolt.
16)Tighten the through bolts securely.
17)Set the starter suspension by aligning the cutout of the
rear housing with the index mark on the yoke.
suspension with the terminal as shown.
18)lnstall the starter magnetic switch and tighten the 6 x 14
mm flange bolts to the specified torque.
TORQUE: 7 N * m (0.7 kgf
O m ,
5.1 Ibf
a f t )
[ l ] INDEXMARKS
/
[3] YOKE
[2] REAR
HOUSING
[4] TROUGH BOLT(2)
[5] SET PLATE (2
6
x
14 (2)
7 N*m (0.7 kgf*m,
[ l ] STARTER
\
MAGNETIC
SWITCH
16-10