Purchase Order Information; Ap560H Purchase Order Information - Extreme Networks ExtremeWireless AP560h Installation Manual

AP560h Overview
Figure 2: AP560h access point side ports
Callout
A
B
C
Note
The console port cap must be tightened to a torque of 5 in-lbs.
If a torque wrench is not available, a flat-bladed screwdrive can be used. The
flat blade must be 7/16 in. wide to avoid noticeable cap slot deformation.
Turn the console port cap until there is resistance from the access point gasket,
and then turn the console port cap to a minimum of ½ turn further.

Purchase Order Information

Learn how to purchase various brackets and accessories for installing the AP560h
access point.
The AP560h access point is sold by itself and cannot be installed without a mounting
bracket or an accessory.
Description
GE1 port
GE2 port
Console port
Note
The slot deformation will not affect the IP67 console port cap
properties.
Purchase Order Information
ExtremeWireless™ AP560h Access Point 11