Purchase Order Information; Ap560H Purchase Order Information - Extreme Networks ExtremeWireless AP560h Installation Manual

Purchase Order Information

Figure 2: AP560h access point side ports
Callout
A
B
C
Note
The console port cap must be tightened to a torque of 12 in-lbs.
If a torque wrench is not available, a flat-bladed screwdrive can be used. The flat blade must
be 7/16 in. wide to avoid noticeable cap slot deformation.
Turn the console port cap until there is resistance from the access point gasket, and then turn
the console port cap to a minimum of ½ turn further.
Purchase Order Information
Learn how to purchase various brackets and accessories for installing the AP560h access point.
The AP560h access point is sold by itself and cannot be installed without a mounting bracket or an
accessory.

AP560h purchase order information

Part number
AP560h-FCC
10 ExtremeWireless™ AP560h Access Point
Description
GE1 port
GE2 port
Console port
Note
The slot deformation will not affect the IP67 console port cap properties.
Description
Cloud-ready, Dual 5GHz, Dual-band, Sensor radio,
Dual Radio 802.11ax/ac/abgn, 4x4:4 MIMO
Outdoor 11ax access point. Internal 30deg/70deg
Panel Antenna.
Domain: US and Columbia
AP560h Overview