PSCOPE 86
SOFTWARE
DEBUGGING
/
HARDWARE
DEBUGGING
V
•
Model 800 and Intellec® Series III development systems
For the ISIS operating system the default work device is :F1:. The RUN program stores
the name of the current work device. You can display the name of the default work device
by entering RUN WORK. You can change the default work device by entering the follow
ing command:
RUN WORK d&vice~mme
For example, RUN WORK :F2 : changes the default work device to drive 2. If you reset the
system, the default work device is still drive 2.
When the Model 800 or the Series III development system is on an NDS-II, you must
assign :F9: to your work device.
PICE™ System Overview
PICE™ SYSTEM
PICE™ SYSTEM____________
[8 0 8 6 /8 0 8 8 EMULATION
| 801 8 6 /8 0 1 8 8 EMULATION
8 0 2 8 6 EMULATION
IjLTA
L
Figure 1-4 The PICE™ System Debugging Capabilities
_ i
1 2 0 0 A
1-13