Extreme Networks AP460C Hardware User's Manual

AP460C, AP460S6C, AP460S12C Hardware Guide
AP460C, AP460S6C, and AP460S12C Hardware User Guide
Install and view specifications and compliance information for AP460C, AP460S6C, and AP460S12C devices.
AP460C, AP460S6C, and AP460S12C Tri Radio 802.11ax access points are based on advanced radio technology and IP67 rated for harsh and
extreme outdoor environments, with an extended temperature range from -40 C - +60 C. The tri-radio design delivers 802.11ax 2x2:2 and 4x4:4
data rates concurrently on the 2.4 and 5 GHz radios, with a third radio as a dedicated dual-band sensor.
For regulatory and compliance information, see
Important! Change the Country Code
If your access point is configured for the World Regulatory Domain, it is important to set the country code to the country in which the AP will be
deployed to meet regulatory requirements and for optimal wireless operation. To do this, follow these steps:
The country code selection is for World models only and is not available to FCC, CAN, and other country-specific models. Per FCC reg-
ulations, all Wi-Fi products marketed in the United States must be set to U.S. channels only.
1. Power on the AP and allow it to find and connect to ExtremeCloud IQ. Once the AP is connected it appears in the table of devices in the
Manage > Devices window.
2. Select the check box next to the AP, and then select Assign Country Code from the Actions drop-down list. In the dialog box, select the
appropriate country from the drop-down list, and then select Save.
3. Upload your changes to the device.
Safety Guidelines
Safety Guidelines
The information in this section applies to AP460C , AP460S6C, and AP460S12C devices.
The following safety icons are used in these guidelines to identify the type of precaution:
AP460C, AP460S6C, AP460S12C Hardware Guide
"Regulatory Compliance Statements".
1
1