Steering Bearing - APRILIA scarabeo 125 i.e. Service Station Manual

Suspensions
•
Fit the cap «1» together with the O-
ring.
•
Lower the cover «1» until the seeger
ring can be insert «2».
•
Fit the seeger ring «2».

Steering bearing

Check that the ball contact area «1» on the rotating
seat «2» and on the fixed seat «3» is not damaged
or too worn. Replace the whole bearing if neces-
sary.
CAUTION
CHECK THAT THE COMPONENTS ARE IN GOOD CONDI-
TIONS.
CAUTION
APPLY GREASE ON BALL CONTACT AREAS ON BOTH
SEATS «2» AND «3».
Rear
SUSP - 166
SCARABEO 125 i.e. - 200 i.e.