Security; Safety Labeling On The Device - Endress+Hauser analytikjena multi N/C UVHS Operating Manual

multi N/C UVHS, multi N/C pharma UV
2

Security

2.1

Safety labeling on the device

For your own safety and to ensure error-free and safe operation of the device, please
read this chapter carefully before commissioning.
Observe all safety instructions listed in this user manual and all messages and infor-
mation displayed on the monitor by the control and analysis software.
Warning and mandatory action labels have been attached to the device and must al-
ways be observed.
Damaged or missing warning and mandatory action labels can cause incorrect ac-
tions leading to personal injury or material damage. The labels must not be removed.
Damaged warning and mandatory action labels must be replaced immediately!
The following warning and mandatory action labels have been attached to the de-
vice:
Warning symbol Meaning
Warning against corro-
sive substances
Warning against harm-
ful or irritating sub-
stances
Warning against mer-
cury
Warning against optical
radiation
Warning against hot
surface
Warning against crush-
ing
Hazardous substances are used during operation:
GHS labeling Meaning
Corrosivity warning
Comment
On the front side, next to the syringe
pump: Warning against acidic solu-
tions
On the front side, next to the syringe
pump: Warning against acidic and
harmful solutions
In the device interior, on the UV reac-
tor: The UV reactor is equipped with a
low-pressure mercury lamp. Observe
this during disposal!
On the UV reactor: UV radiation is
damaging to the eyes. Switch off the
analyzer before removing the UV mod-
ule.
On the UV reactor: Risk of burns from
the hot UV reactor. Allow the analyzer
to cool before removing the UV mod-
ule.
On the autosampler: There is a risk of
injury in the movement range of the
autosampler.
Comment
On the phosphoric acid bottle:
¡
On the sodium persulfate bottle:
¡
Phosphoric acid and the sulfuric
acid contained in the sodium per-
sulfate solution are corrosive.
Security
9