Network Port LEDs
Each network port uses two LEDs to indicate the link activity and speed.
the location of the LEDs on the SSR1200.
and
Table 4 on page 8
describes the LEDs on the SFP+ ports.
Figure 4: Network Port LEDs on an SSR1200
Table 3: Port LEDs on the Ethernet Ports
Callout
1
2
Table 3 on page 7
LED
Link Activity (LED on the left)
Speed (LED on the right)
Figure 4 on page 7
describes the LEDs on the Ethernet ports
Description
•
Blinking amber—Link is
established and there is activity
on the port.
•
Solid amber—Link is established
but there is no activity on the
port.
•
Off—There is no link
established.
•
Solid amber—The link is
operating at 1 Gbps speed.
•
Solid green—The link is
operating at 100 Mbps speed.
•
Off—The link is operating at 10
Mbps speed.
7
shows