Management Port Connector Pinouts For The Ptx1000; Console Port Connector Pinouts For The Ptx1000; Table 28: Rj-45 Management Port Connector Pinouts For The Ptx1000 - Juniper PTX1000 Hardware Manual

Packet transport router
Hide thumbs Also See for PTX1000:
Table of Contents

Advertisement

Table 27: Cable Specifications for Console and Management Connections for the PTX1000 (continued)
Port on PTX1000
Cable Specification
Management
Category 5 cable or
(
MGMT
) port
equivalent suitable for
1000BASE-T operation

Management Port Connector Pinouts for the PTX1000

Table 28: RJ-45 Management Port Connector Pinouts for the PTX1000

Pin
Signal
1
TRP1+
2
TRP1–
3
TRP2+
4
TRP3+
5
TRP3–
6
TRP2–
7
TRP4+
8
TRP4–

Console Port Connector Pinouts for the PTX1000

Copyright © 2018, Juniper Networks, Inc.
Cable Supplied
One 7-foot (2.13-meter)-long
RJ-45 patch cable
The 10/100/1000BASE-T RJ-45 management port (labeled
connector to connect to a management device for out-of-band management.
Table 28 on page 63
provides the pinout information of the RJ-45 management port
connector. An RJ-45 cable is supplied with the PTX1000.
Description
Transmit/receive data pair 1
Transmit/receive data pair 1
Transmit/receive data pair 2
Transmit/receive data pair 3
Transmit/receive data pair 3
Transmit/receive data pair 2
Transmit/receive data pair 4
Transmit/receive data pair 4
The console port (labeled
CON
to connect to a console management device. The default baud rate for the console port
is 9600 baud.
Table 29 on page 64
provides the pinout information for the RJ-45 console connector.
An RJ-45 cable and an RJ-45 to DB-9 adapter are supplied with the PTX1000.
NOTE:
If your laptop or PC does not have a DB-9 male connector pin and you
want to connect your laptop or PC directly to a PTX1000, use a combination
of the RJ-45 cable and RJ-45 to DB-9 adapter supplied with the router and
a USB to DB-9 male adapter. You must provide the USB to DB-9 male adapter.
Chapter 2: Site Planning, Preparation, and Specifications
Maximum Length
328 feet
(100 meters)
) is an RS-232 serial interface that uses an RJ-45 connector
Device
Receptacle
RJ-45
) uses an RJ-45
MGMT
63

Advertisement

Table of Contents
loading

Table of Contents