Ptx1000 Dc Power Specifications; Table 14: Ptx1000 Ac Power Cord Specifications - Juniper PTX1000 Hardware Manual

Table 14: PTX1000 AC Power Cord Specifications

Country/Region Electrical Specifications
Australia 250 VAC, 10 A, 50 Hz
China 250 VAC, 10 A, 50 Hz
Europe (except Italy, 250 VAC, 10 A, 50 Hz
Switzerland, and United
Kingdom)
Italy 250 VAC, 10 A, 50 Hz
Japan 125 VAC, 12 A, 50 Hz or 60 Hz
North America 125 VAC, 13 A, 60 Hz
South Korea 250 VAC, 10 A, 60 Hz
Switzerland 250 VAC, 10 A, 50 Hz
United Kingdom 250 VAC, 10 A, 50 Hz

PTX1000 DC Power Specifications

Copyright © 2018, Juniper Networks, Inc.
NOTE: In North America, AC power cords must not exceed 14.75 feet
(approximately 4.5 meters) in length, to comply with National Electrical Code
(NEC) Sections 400-8 (NFPA 75, 5-2.2) and 210-52 and Canadian Electrical
Code (CEC) Section 4-010(3). The cords that can be ordered for the PTX1000
are in compliance.
Table 14 on page 41 lists AC power cord specifications provided for each country or region.
Table 15 on page 42 describes the DC power specifications for a PTX1000.
NOTE: We recommend that the 48-VDC facility DC source be equipped with
a circuit breaker rated at 40 A (–48 VDC) minimum, or as required by local
code.
Plug Standards Juniper Model Number
AS/NZ 3109-1996 CBL-EX-PWR-C13-AU
GB 1002-1996 CBL-EX-PWR-C13-CH
CEE (7) VII CBL-EX-PWR-C13-EU
CEI 23-16/VII CBL-EX-PWR-C13-IT
JIS C8303 CBL-EX-PWR-C13-JP
CAN/CSA No. 49-92 CBL-EX-PWR-C13-US
KSC 8305; K60884-1 CBL-EX-PWR-C13-KR
SEV 1011 SEV 1991; EN CBL-EX-PWR-C13-SZ
60320 C13
BS 1363/A CBL-EX-PWR-C13-UK
Chapter 1: Overview
Graphic
41