Ptx1000 Management Panel; Figure 9: Ptx1000 Port Panel And Management Panel; Table 7: Ptx1000 Network Port Leds - Juniper PTX1000 Hardware Manual

PTX1000 Packet Transport Router Hardware Guide

Table 7: PTX1000 Network Port LEDs

Color State
Unlit Off
Green On steadily
Blinking
Amber On steadily
Blinking

PTX1000 Management Panel

PTX1000 Management Panel
30
Description
The port is administratively disabled, there is no power, the link is down, or a
transceiver is not present.
A link is established.
The beacon function was enabled on the port.
When the port is configured to operate as four 10-Gigabit Ethernet interfaces,
indicates that one or more interfaces (but not all four) are up.
There are one or more errors on the connections.
PTX1000 Management Panel on page 30
PTX1000 Management Port LEDs on page 31
PTX1000 Chassis Status LEDs on page 32
The PTX1000 management panel is found next to the port panel (see
Figure 9 on page 30).

Figure 9: PTX1000 Port Panel and Management Panel

1— Port panel
You manage the PTX1000 by using the Junos OS CLI, which is accessible through the
console and out-of-band management ports on the management panel. In addition, the
management panel has system status LEDs that alert you to minor or major alarms or
other issues with the router, external clock synchronization ports, and a USB port to
support software installation and recovery.
panel in detail.
2— Management panel
Figure 10 on page 31 shows the management
Copyright © 2018, Juniper Networks, Inc.