Rct (Reset Continuous Trigger) Mode - JAI GO-5000M-PGE User Manual

Cmos digital progressive scan monochrome and monochrome uv camera with gige interface

Hide thumbs Also See for GO-5000M-PGE:

Table of Contents

GO-5000M-PGE | GO-5000M-PGE-UV | User Manual (Ver. 2.0)

RCT (Reset Continuous Trigger) Mode

RCT mode can use ALC control to ensure that the proper exposure is set when the trigger pulse is

input. the following drawing, the steps to achieve this combination are explained.

①

The exposure control is the same as in continuous mode.

When the trigger signal is input, the charge that has already been accumulated during the current

②

exposure period is read out very quickly and a new exposure period starts. The exposure continues as in

continuous mode.

③

All video level data from every exposure is transferred to ALC control.

④

The video output sent to the GigE interface is only the signal after the trigger is input.

- 64 -

Main Functions

Table of Contents

Go-5000m-pge-uv