Rct (Reset Continuous Trigger) Mode - JAI GO-5000M-PGE-UV User Manual

Cmos digital progressive scan monochrome uv camera

Hide thumbs Also See for GO-5000M-PGE-UV:

Table of Contents

RCT (Reset Continuous Trigger) mode

RCT mode can use ALC control to ensure that the proper exposure is set when the trigger pulse

is input. In the following drawing, the steps to achieve this combination are explained.

① The exposure control is the same as in continuous mode.

② When the trigger signal is input, the charge that has already been accumulated during the

current exposure period is read out very quickly and a new exposure period starts. The

exposure continues as in continuous mode.

③ All video level data from every exposure is transferred to ALC control.

④ The video output sent to the GigE interface is only the signal after the trigger is input.

— 43 —

GO-5000M-PGE-UV

Table of Contents