[3.05.4] Inputs/Outputs; Analog Inputs; Analog Outputs - Siemens SIPROCESS GA700 Operating Manual

6.19.4

[3.05.4] Inputs/outputs

6.19.4.1

[1] Analog inputs

Service menu. You only have read access.
In this menu you get information about the actual current values of the available analog
inputs. The following information is displayed for each analog input:
Navigation lines in the menu [3.05.4.1]
Standard name of the analog input
Actual current value
Current measured value
AI01 ...AIn
1)
Measured value status
2)
Current value converted into currently set unit
3)
The following symbols are used to display the measured value status:
●
●
●
6.19.4.2

[2] Analog outputs

You only have read access.
In this menu you get information about the actual current values of the available analog
outputs. The menu is only displayed with installed option modules (2.1 or 2.2). The following
information is then displayed for each analog output:
Navigation lines in the menu [3.05.4.2]
Standard name of the analog output
Actual current value
Current measured value
AM1: AO11 (component 1), AO12 (component 2), AO13 (not assigned)
1)
AM2: AO21 (component 3), AO22 (component 4), AO23 (not assigned)
2)
Measured value status
3)
Current value converted into currently set unit
4)
The following symbols are used to display the measured value status:
●
●
●
Operating with the Local User Interface
Operating Manual, 06/2017, A5E31930478-05
: Measured value status "Good" - no symbolic representation
: Measured value status "Uncertain"
: Measured value status "Bad"
: Measured value status "Good" - no symbolic representation
: Measured value status "Uncertain"
: Measured value status "Bad"
6.19 [3.05] Maintenance & Diagnostics > Diagnostics values
1)
Status symbol
Status symbol
1) 2)
Status symbol
Status symbol
User-specific name
3)
Display in set unit
2)
User-specific name
3)
Display in set unit
3)
Functions
Display in mA
3)
Display in mA
4)
221