Filtering Messages - Siemens SIPROCESS GA700 Operating Manual

Functions
6.13 [2.14] Settings > Set message parameters
6.13.2

Filtering messages

Procedure
1. Main menu > "2. Settings" > "14. Set message parameters" > "1. Filter..."
2. Set the filter conditions.
Set one or more filter conditions. Use the following parameter fields or editing windows
for this purpose:
– "Message activity":
– "ID No.":
– "Component/module":
– "Message type":
3. Set individual message parameters: → Set message parameters (Page 187).
188
"All": All messages are displayed by default.
"Switched on": Only the switched on messages are displayed.
"Turned off": Only the turned off messages are displayed.
The wildcards"???" are set by default.
All messages are displayed.
To filter messages with numbers 200 to 299, for example, replace the first "?" with the
value "2" ("2??).
Select/deselect the check boxes included in the editing window. Only those messages
whose properties you have selected are displayed.
"Device" relates to general messages from components or two messages of the
processing module. You can also filter for those messages that only apply to specific
components or specific modules.
Select/deselect the check boxes included in the editing window. Only those messages
whose properties you have selected are displayed.
All message types are activated by default. When you select the check box "None", all
other check boxes are deselected.
Operating with the Local User Interface
Operating Manual, 06/2017, A5E31930478-05