7.7
[2.09.3] Digital inputs
7.7.1
Overview of digital inputs
Functions
The device functions can be controlled using digital inputs. A function can only be controlled
by one digital input or one result of logic operation.
Assignments of function (pre-selection) - function
Note
Assignment rule
To assign a function, you first make a pre-selection and then set a function that is included in
the pre-selection: Setting digital inputs (Page 59).
The device excludes the multiple assignment of functions. When you assign a function, this
function is no longer available for other digital inputs.
The list below includes all functions that you can control digitally. The information in the
"Trigger" column applies to the "High" setting. The signals or signal edges are inverted at
"Low".
Table 7- 2
Function assignment at function (pre-selection): "Free"
Function
Trigger
Free
Quick Start
Compact Operating Instructions, 01/2013, A5E31805656-01
Remark / effect
-
Digital input is free: no function assignment.
Commissioning
7.7 [2.09.3] Digital inputs
55