General Information; Kc Safety Note - Information For Korea Only; Safety Instructions - Siemens SIPROCESS GA700 Operating Manual

General information

2.1

KC Safety note - Information for Korea only

Class A Equipment (Industrial Broadcasting & Communication Equipment)
This equipment is Industrial (Class A) electromagnetic wave suitability equipment and seller
or user should take notice of it, and this equipment is to be used in the places except for
home.
2.2

Safety instructions

Laws and directives
The failure to observe directives and laws when connecting and installing increases the
danger of explosion and leakage due to improper handling. When connecting and installing,
observe the test certificates, stipulations and laws applicable in your country in order to
avoid danger.
These include, for example:
• IEC 60079-14 (international)
• National Electrical Code (NEC - NFPA 70) (USA)
• Canadian Electrical Code (CEC) (Canada)
• EN 60079-14 (formerly VDE 0165, T1) (EU)
• EN 61010
• Ordinance on Industrial Safety and Health (Germany)
Device modifications
Danger to personnel, system and the environment can result from modifications and repairs
to the device, especially in hazardous areas.
• Only carry out modifications or repairs that are described in the instructions for the
See also
References (Page 281)
Operating with the Local User Interface
Operating Manual, 06/2017, A5E31930478-05
WARNING
WARNING
device. Failure to observe this requirement cancels the manufacturer's warranty and the
product approvals.
2
15